Standard Tread
Aultman & Taylor 18-36
The Aultman & Taylor 18-36 is a classic 2WD tractor built for farm work. It has a simple 4x2 chassis design, which means it has four wheels with two of them providing power. This tractor is best suited for flat fields and basic farming tasks. Under the hood, the 18-36 has a liquid-cooled, 4-cylinder gasoline engine made by Aultman & Taylor. The engine is quite large, with a displacement of 630 cubic inches. It has a bore of 5 inches and a stroke of 8 inches, which gives it good power for its time. The engine runs at a steady 600 RPM, which was common for older tractors. This lower speed helps the tractor work steadily and reliably in the fields.
ManufacturerAultman & TaylorEngine4-cyl
Image not recorded
Quick specs
- Category
- Standard Tread
Overview
About the Aultman & Taylor 18-36
The Aultman & Taylor 18-36 is a classic 2WD tractor built for farm work. It has a simple 4x2 chassis design, which means it has four wheels with two of them providing power. This tractor is best suited for flat fields and basic farming tasks. Under the hood, the 18-36 has a liquid-cooled, 4-cylinder gasoline engine made by Aultman & Taylor. The engine is quite large, with a displacement of 630 cubic inches. It has a bore of 5 inches and a stroke of 8 inches, which gives it good power for its time. The engine runs at a steady 600 RPM, which was common for older tractors. This lower speed helps the tractor work steadily and reliably in the fields.
Full specifications
Every recorded spec
General
| Manufacturer | Aultman & Taylor |
|---|---|
| Model | 18-36 |
| Category | Standard Tread tractor |
| Type | 4x2 2WD |
Engine
| Make | Aultman & Taylor |
|---|---|
| Cylinders | 4 |
| Displacement | 630ci |
| Bore | 5in |
| Stroke | 8in |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
Head to head
18-36 vs. Standard Tread median
How the Aultman & Taylor 18-36 compares to other Standard Tread tractors
| Spec | This model | Standard Tread median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 630 ci | 382 ci | +65% | 81st |
| Cylinders | 4 | 4 | at median | 50th |
Medians and percentiles are computed from the standard tread tractors in our database with a recorded value for each spec (sample sizes 353–367 models).
Compare to tractors with similar specs
Commonly compared Aultman & Taylor tractors
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| Aultman & Taylor 15-30 | — | 8,240 lb | — | Compare → |
| Aultman & Taylor 22-45 | — | 12,880 lb | — | Compare → |
| Aultman & Taylor 25-50 | — | — | — | Compare → |
| Aultman & Taylor 30-60 | — | 24,450 lb | — | Compare → |
Commonly compared tractors with similar horsepower from other brands
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| Advance-Rumely 6A | — | 6,370 lb | — | Compare → |
| Advance-Rumely DoAll | — | 3,702 lb | — | Compare → |
| Advance-Rumely OilPull B 25/45 | — | 25,000 lb | — | Compare → |
| Advance-Rumely OilPull E 30/60 | — | 26,300 lb | — | Compare → |
| Advance-Rumely OilPull F 15/30 | — | 16,500 lb | — | Compare → |
Explore
Aultman & Taylor siblings
Explore
Similar-spec models
FAQ
Common questions
What engine configuration does the Aultman & Taylor 18-36 use?
The Aultman & Taylor 18-36 is equipped with a 4-cylinder engine displacing 630 ci.
What maintenance does the Aultman & Taylor 18-36 require?
Like any tractor, the Aultman & Taylor 18-36 needs periodic engine oil and filter changes, hydraulic fluid checks, and regular greasing and inspection. The owner's manual lists the manufacturer's recommended service intervals.