Image not recorded
Head to head · Row Crop
AGCO DT160 vs Allis Chalmers 7050
Allis ChalmersModel B
Allis Chalmers 7050
Row Crop
- power
- 156 hp
- displacement
- 426 ci
- Cylinders
- 6
- Forward gears
- 20
AGCOAGCO DT160
vs
Allis ChalmersAllis Chalmers 7050
How they compare
Headline specs vs. the whole Row Crop
Engine Power
▲ DT160 higher · +4 hp (+3%)DT160160 hp
7050156 hp
Median Row Crop Tractor138 hp
DT160 is in the 62nd percentile; 7050 is in the 60th · 1,206 models
Engine Displacement
▲ DT160 higher · +79 ci (+19%)DT160505 ci
7050426 ci
Median Row Crop Tractor391 ci
DT160 is in the 89th percentile; 7050 is in the 72nd · 1,409 models
Cylinders
= Effectively tiedDT1606
70506
Median Row Crop Tractor6
DT160 is in the 50th percentile; 7050 is in the 50th · 1,417 models
Forward Gears
▲ 7050 higher · +2 (+11%)DT16018
705020
Median Row Crop Tractor16
DT160 is in the 61st percentile; 7050 is in the 70th · 1,200 models
DT160 (A)7050 (B)Median Row Crop Tractor
Full comparison
Every spec, side by side
General Information
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Manufacturer | AGCO | Allis Chalmers | — |
| Model | DT160 | 7050 | — |
| Category | Row Crop | Row Crop | Same |
Engine
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Manufacturer | Cummins | Allis Chalmers | — |
| Model | C8.3 | Allis Chalmers | — |
| Power Output | 160hp | 156hp | ▲ DT160+4 hp · +3% |
| Rated RPM | 2,200RPM | 2,300RPM | ▲ 7050+100 RPM · +5% |
| Cylinders | 6 | 6 | Same |
| Displacement | 505ci | 426ci | ▲ DT160+79 ci · +19% |
| Bore | 4.5in | 4.3in | ▲ DT160+0.2 in · +5% |
| Stroke | 5.3in | 5in | ▲ DT160+0.3 in · +6% |
Transmission
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Type | Full power shift | Selective gear fixed ratio with partial range operator-controlled power shifting | — |
Dimensions & Weight
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Length | 203in | 163in | ▲ DT160+40 in · +25% |
| Width | 98.2in | 95.5in | ▲ DT160+2.7 in · +3% |
| Height | 121in | 116in | ▲ DT160+5 in · +4% |
| Operating Weight | 18,500lb | 19,530lb | ▲ 7050+1,030 lb · +6% |
Hydraulics
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| System Type | Closed center pressure flow compensated (PFC) | Direct engine drive | — |
| Steering Type | Hydrostatic power | Hydrostatic Power | Same |
Power Take-off (PTO)
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Type | Independent | Independent Rear PTO | — |
| Speed 1 | 540rpm | 1,000rpm | ▲ 7050+460 rpm · +85% |
| Speed 2 | 1,000rpm | 1,000rpm | Same |
Hitch & Towing
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Hitch Type | Three-point | Three-Point Hitch | — |
| Hitch Category | III/IIIN | III/II | — |
| Hitch Position | Rear | Rear | Same |
| Hitch Capacity | 16,000lb | Not recorded | — |
Chassis & Drive
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Chassis Type | 4x4 MFWD 4WD | 4x2 2WD | — |
| Drive Type | 4WD | 2WD | — |
| Steering Type | Hydrostatic power | Hydrostatic Power | Same |
| Brake Type | Hydraulic wet disc | Differential Hydraulic Wet Discs | — |
Electrical
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Starter Type | Electric | Electric | Same |
Operator Station
| Spec | AGCO DT160 | Allis Chalmers 7050 | Difference |
|---|---|---|---|
| Type | Cab | Open operator station or Cab (optional) | — |
Category context
Both models against the field
Engine Power
median 138 hpA · 62nd percentile (160 hp)B · 60th percentile (156 hp)
Engine Displacement
median 391 ciA · 89th percentile (505 ci)B · 72nd percentile (426 ci)
Cylinders
median 6A · 50th percentile (6)B · 50th percentile (6)
Forward Gears
median 16A · 61st percentile (18)B · 70th percentile (20)
Operating Weight
median 12,307 lbA · 80th percentile (18,500 lb)B · 83rd percentile (19,530 lb)
A · DT160B · 7050Median Row Crop Tractor