Image not recorded
Head to head · Utility
AGCO GT75 vs Deutz-Fahr Intrac 2005
Image not recorded
Deutz-FahrModel B
Deutz-Fahr Intrac 2005
Tool Carrier
- power
- 84.8 hp
- displacement
- 287 ci
- Cylinders
- 5
- Forward gears
- Not recorded
AGCOAGCO GT75
vs
Deutz-FahrDeutz-Fahr Intrac 2005
How they compare
Headline specs vs. the whole Utility
Engine Power
▲ Intrac 2005 higher · +1.8 hp (+2%)GT7583 hp
Intrac 200584.8 hp
Median Utility Tractor55 hp
GT75 is in the 73rd percentile; Intrac 2005 is in the 74th · 5,383 models
Engine Displacement
▲ Intrac 2005 higher · +43 ci (+18%)GT75244 ci
Intrac 2005287 ci
Median Utility Tractor183 ci
GT75 is in the 68th percentile; Intrac 2005 is in the 83rd · 5,580 models
Cylinders
▲ Intrac 2005 higher · +1 (+25%)GT754
Intrac 20055
Median Utility Tractor4
GT75 is in the 50th percentile; Intrac 2005 is in the 88th · 5,720 models
Operating Weight
▲ Intrac 2005 higher · +1 lb (<1%)GT755,511 lb
Intrac 20055,512 lb
Median Utility Tractor5,303 lb
GT75 is in the 51st percentile; Intrac 2005 is in the 52nd · 5,107 models
GT75 (A)Intrac 2005 (B)Median Utility Tractor
Full comparison
Every spec, side by side
General Information
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Manufacturer | AGCO | Deutz-Fahr | — |
| Model | GT75 | Intrac 2005 | — |
| Category | Utility | Tool Carrier | — |
Engine
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Manufacturer | SAME Deutz-Fahr | Deutz-Fahr | — |
| Model | Not recorded | F5L912 | — |
| Power Output | 83hp | 84.8hp | ▲ Intrac 2005+1.8 hp · +2% |
| Rated RPM | 2,200RPM | 2,500RPM | ▲ Intrac 2005+300 RPM · +14% |
| Cylinders | 4 | 5 | ▲ Intrac 2005+1 · +25% |
| Displacement | 244ci | 287ci | ▲ Intrac 2005+43 ci · +18% |
| Bore | 4.1in | 3.9in | ▲ GT75+0.2 in · +5% |
| Stroke | 4.5in | 4.7in | ▲ Intrac 2005+0.2 in · +4% |
Transmission
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Type | Synchro-shuttle | Hydrostatic | — |
Dimensions & Weight
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Length | 152in | 173in | ▲ Intrac 2005+21 in · +14% |
| Width | 76.4in | 86.6in | ▲ Intrac 2005+10.2 in · +13% |
| Height | 106in | 99.4in | ▲ GT75+6.6 in · +7% |
| Operating Weight | 5,511lb | 5,512lb | ▲ Intrac 2005+1 lb · <1% |
Hydraulics
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| System Type | Open center | Not recorded | — |
| Steering Type | Power | Power | Same |
Power Take-off (PTO)
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Type | Independent with electro-hydraulic clutch | Not recorded | — |
| Speed 1 | 540rpm | Not recorded | — |
| Speed 2 | 1,000rpm | Not recorded | — |
Hitch & Towing
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Hitch Type | Not recorded | Rear Type | — |
| Hitch Category | II | II | Same |
| Hitch Position | Rear | Not recorded | — |
| Hitch Capacity | 3,530lb | Not recorded | — |
Chassis & Drive
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Chassis Type | 4x2 2WD | 4x4 4WD | — |
| Drive Type | 2WD | 4WD | — |
| Steering Type | Power | Power | Same |
| Brake Type | Wet disc | Not recorded | — |
Electrical
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Starter Type | Electric | Not recorded | — |
Operator Station
| Spec | AGCO GT75 | Deutz-Fahr Intrac 2005 | Difference |
|---|---|---|---|
| Type | Two-post folding ROPS | Cab | — |
Category context
Both models against the field
Engine Power
median 55 hpA · 73rd percentile (83 hp)B · 74th percentile (84.8 hp)
Engine Displacement
median 183 ciA · 68th percentile (244 ci)B · 83rd percentile (287 ci)
Cylinders
median 4A · 50th percentile (4)B · 88th percentile (5)
Operating Weight
median 5,303 lbA · 51st percentile (5,511 lb)B · 52nd percentile (5,512 lb)
Length
median 137 inA · 67th percentile (152 in)B · 88th percentile (173 in)
A · GT75B · Intrac 2005Median Utility Tractor