Head to head · Utility
AGCO LT75 vs Deutz-Fahr DX 3.90
Image not recorded
Deutz-FahrModel B
Deutz-Fahr DX 3.90
Utility
- power
- 75 hp
- displacement
- 249 ci
- Cylinders
- 4
- Forward gears
- 12
AGCOAGCO LT75
vs
Deutz-FahrDeutz-Fahr DX 3.90
How they compare
Headline specs vs. the whole Utility
Engine Power
▲ LT75 higher · +4 hp (+5%)LT7579 hp
DX 3.9075 hp
Median Utility Tractor55 hp
LT75 is in the 70th percentile; DX 3.90 is in the 68th · 5,383 models
Engine Displacement
▲ LT75 higher · +25 ci (+10%)LT75274 ci
DX 3.90249 ci
Median Utility Tractor183 ci
LT75 is in the 79th percentile; DX 3.90 is in the 70th · 5,580 models
Cylinders
= Effectively tiedLT754
DX 3.904
Median Utility Tractor4
LT75 is in the 50th percentile; DX 3.90 is in the 50th · 5,720 models
Forward Gears
▲ LT75 higher · +4 (+33%)LT7516
DX 3.9012
Median Utility Tractor12
LT75 is in the 73rd percentile; DX 3.90 is in the 50th · 4,941 models
LT75 (A)DX 3.90 (B)Median Utility Tractor
Full comparison
Every spec, side by side
General Information
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Manufacturer | AGCO | Deutz-Fahr | — |
| Model | LT75 | DX 3.90 | — |
| Category | Utility | Utility | Same |
Engine
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Manufacturer | Cummins | Deutz | — |
| Model | Not recorded | F4L 913 | — |
| Power Output | 79hp | 75hp | ▲ LT75+4 hp · +5% |
| Rated RPM | 2,201RPM | 2,350RPM | ▲ DX 3.90+149 RPM · +7% |
| Cylinders | 4 | 4 | Same |
| Displacement | 274ci | 249ci | ▲ LT75+25 ci · +10% |
| Bore | 4.1in | 3.9in | ▲ LT75+0.2 in · +5% |
| Stroke | 5.2in | 4.8in | ▲ LT75+0.4 in · +8% |
Transmission
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Type | Selective gear fixed ratio with partial (2) range operator controlled powershift | 12-speed partially synchronized | — |
Dimensions & Weight
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Length | 166in | 158in | ▲ LT75+8 in · +5% |
| Width | Not recorded | 82.3in | — |
| Height | 110in | 101in | ▲ LT75+9 in · +9% |
| Wheelbase | 101in | Not recorded | — |
| Operating Weight | 9,600lb | 6,922lb | ▲ LT75+2,678 lb · +39% |
Hydraulics
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| System Type | Open center | Open Center | Same |
| Steering Type | Hydrostatic power steering | Power | — |
Power Take-off (PTO)
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Speed 1 | 540rpm | Not recorded | — |
| Speed 2 | 1,000rpm | Not recorded | — |
Tires
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Front Tire Size | 14.9R24 | Not recorded | — |
| Rear Tire Size | 18.4R34 | Not recorded | — |
Hitch & Towing
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Hitch Type | Three-Point Hitch | Category II | — |
| Hitch Category | II | 3 | — |
| Hitch Position | Rear | Rear | Same |
| Hitch Capacity | 7,817lb | Not recorded | — |
Chassis & Drive
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Chassis Type | Front wheel assist (4WD) | 4x2 2WD | — |
| Drive Type | 4WD | 2WD | — |
| Steering Type | Hydrostatic power steering | Power | — |
Electrical
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Starter Type | 12-volt electric | Not recorded | — |
Operator Station
| Spec | AGCO LT75 | Deutz-Fahr DX 3.90 | Difference |
|---|---|---|---|
| Type | Cab | ROPS | — |
Category context
Both models against the field
Engine Power
median 55 hpA · 70th percentile (79 hp)B · 68th percentile (75 hp)
Engine Displacement
median 183 ciA · 79th percentile (274 ci)B · 70th percentile (249 ci)
Cylinders
median 4A · 50th percentile (4)B · 50th percentile (4)
Forward Gears
median 12A · 73rd percentile (16)B · 50th percentile (12)
Operating Weight
median 5,303 lbA · 84th percentile (9,600 lb)B · 66th percentile (6,922 lb)
A · LT75B · DX 3.90Median Utility Tractor