Head to head · Utility
AGCO ST25 vs Allis Chalmers FD3
Allis ChalmersModel B
Allis Chalmers FD3
Utility
- power
- 25 hp
- displacement
- 95.8 ci
- Cylinders
- 2
- Forward gears
- 8
AGCOAGCO ST25
vs
Allis ChalmersAllis Chalmers FD3
How they compare
Headline specs vs. the whole Utility
Engine Power
▲ FD3 higher · +0.7 hp (+3%)ST2524.3 hp
FD325 hp
Median Utility Tractor55 hp
ST25 is in the 15th percentile; FD3 is in the 16th · 5,383 models
Engine Displacement
▲ FD3 higher · +27.3 ci (+40%)ST2568.5 ci
FD395.8 ci
Median Utility Tractor183 ci
ST25 is in the 8th percentile; FD3 is in the 22nd · 5,580 models
Cylinders
▲ ST25 higher · +1 (+50%)ST253
FD32
Median Utility Tractor4
ST25 is in the 23rd percentile; FD3 is in the 3rd · 5,720 models
Forward Gears
▲ FD3 higher · +2 (+33%)ST256
FD38
Median Utility Tractor12
ST25 is in the 11th percentile; FD3 is in the 23rd · 4,941 models
ST25 (A)FD3 (B)Median Utility Tractor
Full comparison
Every spec, side by side
General Information
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Manufacturer | AGCO | Allis Chalmers | — |
| Model | ST25 | FD3 | — |
| Category | Utility, Sub-Compact | Utility | — |
Engine
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Manufacturer | Iseki | Vendeuvre | — |
| Model | E3112 | Not recorded | — |
| Power Output | 24.3hp | 25hp | ▲ FD3+0.7 hp · +3% |
| Rated RPM | 2,800RPM | 2,200RPM | ▲ ST25+600 RPM · +27% |
| Cylinders | 3 | 2 | ▲ ST25+1 · +50% |
| Displacement | 68.5ci | 95.8ci | ▲ FD3+27.3 ci · +40% |
| Bore | 3.1in | 3.1in | Same |
| Stroke | 3.1in | 3.9in | ▲ FD3+0.8 in · +26% |
Transmission
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Type | Gear | Manual | — |
Dimensions & Weight
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Length | 106in | 112in | ▲ FD3+6 in · +6% |
| Width | 41in | Not recorded | — |
| Height | 75.2in | 51.2in | ▲ ST25+24 in · +47% |
| Operating Weight | 1,588lb | 3,150lb | ▲ FD3+1,562 lb · +98% |
Hydraulics
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| System Type | Open Center | Not recorded | — |
| Pressure | 1,493psi | Not recorded | — |
| Steering Hydraulic Flow | 2.6gpm | Not recorded | — |
| Steering Type | Power | Not recorded | — |
Power Take-off (PTO)
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Type | Rear PTO: 540 (1.375), Mid PTO: SAE 15 1.0 | Not recorded | — |
| Speed 1 | 540rpm | Not recorded | — |
Hitch & Towing
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Hitch Type | Three-Point Hitch | Not recorded | — |
| Hitch Category | I | Not recorded | — |
| Hitch Position | Rear | Not recorded | — |
Chassis & Drive
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Chassis Type | 4x4 MFWD 4WD | 4x2 | — |
| Drive Type | 4WD | 2WD | — |
| Steering Type | Power | Not recorded | — |
Electrical
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Starter Type | Electric | Not recorded | — |
Capacities
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Coolant | 1.9gal | Not recorded | — |
Operator Station
| Spec | AGCO ST25 | Allis Chalmers FD3 | Difference |
|---|---|---|---|
| Type | ROPS | Not recorded | — |
Category context
Both models against the field
Engine Power
median 55 hpA · 15th percentile (24.3 hp)B · 16th percentile (25 hp)
Engine Displacement
median 183 ciA · 8th percentile (68.5 ci)B · 22nd percentile (95.8 ci)
Cylinders
median 4A · 23rd percentile (3)B · 3rd percentile (2)
Forward Gears
median 12A · 11th percentile (6)B · 23rd percentile (8)
Operating Weight
median 5,303 lbA · 7th percentile (1,588 lb)B · 25th percentile (3,150 lb)
A · ST25B · FD3Median Utility Tractor