Deutz-FahrModel A
Deutz-Fahr Intrac 2004
Tool Carrier
- power
- 70 hp
- displacement
- 230 ci
- Cylinders
- 4
- Forward gears
- 12
Head to head · Tool Carrier
Deutz-Fahr Intrac 2004 vs Fendt F255GT
FendtModel B
Fendt F255GT
Tool Carrier
- power
- 70 hp
- displacement
- 230 ci
- Cylinders
- 4
- Forward gears
- 20
Deutz-FahrDeutz-Fahr Intrac 2004
vs
FendtFendt F255GT
Full comparison
Every spec, side by side
General Information
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Manufacturer | Deutz-Fahr | Fendt | — |
| Model | Intrac 2004 | F255GT | — |
| Category | Tool Carrier | Tool Carrier | Same |
Engine
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Manufacturer | Deutz-Fahr | KHD (Klöckner-Humboldt-Deutz) | — |
| Model | F4L912 | 3.8L 4-cyl diesel | — |
| Power Output | 70hp | 70hp | Same |
| Rated RPM | 2,300RPM | 2,300RPM | Same |
| Cylinders | 4 | 4 | Same |
| Displacement | 230ci | 230ci | Same |
| Bore | 3.9in | 3.9in | Same |
| Stroke | 4.7in | 4.7in | Same |
Transmission
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Type | Synchronized | Synchromesh, Creeper | — |
Dimensions & Weight
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Length | 173in | 183in | ▲ F255GT+10 in · +6% |
| Width | Not recorded | 72.8in | — |
| Height | 98.4in | 101in | ▲ F255GT+2.6 in · +3% |
| Operating Weight | 8,004lb | 7,220lb | ▲ Intrac 2004+784 lb · +11% |
Hydraulics
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| System Type | Not recorded | Open Center | — |
| Steering Type | Not recorded | Power | — |
Chassis & Drive
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Chassis Type | 4x4 MFWD 4WD | 4x2 2WD | — |
| Drive Type | 4WD | 2WD | — |
| Steering Type | Not recorded | Power | — |
Electrical
| Spec | Deutz-Fahr Intrac 2004 | Fendt F255GT | Difference |
|---|---|---|---|
| Starter Type | Not recorded | Electric | — |