Deutz-FahrModel A
Deutz-Fahr Intrac 2004
Tool Carrier
- power
- 70 hp
- displacement
- 230 ci
- Cylinders
- 4
- Forward gears
- 12
Head to head · Tool Carrier
Deutz-Fahr Intrac 2004 vs Fendt F275GT
Image not recorded
FendtModel B
Fendt F275GT
Tool Carrier
- power
- 70 hp
- displacement
- 230 ci
- Cylinders
- 4
- Forward gears
- 20
Deutz-FahrDeutz-Fahr Intrac 2004
vs
FendtFendt F275GT
Full comparison
Every spec, side by side
General Information
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Manufacturer | Deutz-Fahr | Fendt | — |
| Model | Intrac 2004 | F275GT | — |
| Category | Tool Carrier | Tool Carrier | Same |
Engine
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Manufacturer | Deutz-Fahr | KHD | — |
| Model | F4L912 | F4L915H | — |
| Power Output | 70hp | 70hp | Same |
| Rated RPM | 2,300RPM | 2,300RPM | Same |
| Cylinders | 4 | 4 | Same |
| Displacement | 230ci | 230ci | Same |
| Bore | 3.9in | 3.9in | Same |
| Stroke | 4.7in | 4.7in | Same |
Transmission
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Type | Synchronized | Synchromesh | — |
Dimensions & Weight
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Length | 173in | 188in | ▲ F275GT+15 in · +9% |
| Width | Not recorded | 74in | — |
| Height | 98.4in | 102in | ▲ F275GT+3.6 in · +4% |
| Operating Weight | 8,004lb | 8,201lb | ▲ F275GT+197 lb · +2% |
Hydraulics
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| System Type | Not recorded | Open Center | — |
| Steering Type | Not recorded | Power | — |
Chassis & Drive
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Chassis Type | 4x4 MFWD 4WD | 4x2 2WD | — |
| Drive Type | 4WD | 2WD | — |
| Steering Type | Not recorded | Power | — |
Electrical
| Spec | Deutz-Fahr Intrac 2004 | Fendt F275GT | Difference |
|---|---|---|---|
| Starter Type | Not recorded | 12 Volts | — |