Comparing the Allis Chalmers 7000 and the John Deere 30A

This page provides a detailed comparison of the specifications for the Allis Chalmers 7000 and the John Deere 30A. Explore key differences and similarities across various aspects, including Power Output, Cylinders and Type.

SpecificationAllis Chalmers 7000John Deere 30A
General Information
Manufacturer
Allis Chalmers
John Deere
Model
7000
30A
Category
Agricultural
Agricultural, Orchard/Vineyard
Engine
Manufacturer
Allis Chalmers
Lombardini
Model
2900
9LD 626/2
Power Output
117hp
25hp
Rated RPM
2,200RPM
2,800RPM
Cylinders
6
2
Displacement
301ci
76.2ci
Bore
3.88in
3.74in
Stroke
4.25in
3.46in
Transmission
Type
Partial power shift
Manual
Dimensions & Weight
Length
183in
Height
113in
Operating Weight
9,550lb
Hydraulics
System Type
Open center
Steering Type
Power
Hitch & Towing
Hitch Type
Three-Point Hitch
Hitch Category
II
Category 3
Hitch Position
Rear
Chassis & Drive
Chassis Type
4x2 2WD
4x4 articulated 4WD
Drive Type
2WD
4WD
Steering Type
Power
Brake Type
Differential dry disc
Electrical
Starter Type
Electric Starter
Electric Starter
Capacities
Coolant
22.5qts
Operator Station
Type
Cab (Acousta-Cab optional or Acousta-Cab II from 1978)

Frequently Asked Questions

Which tractor is better, the Allis Chalmers 7000 or the John Deere 30A?

The "better" tractor depends on your specific needs. This comparison provides objective data to help you decide which machine is the right fit for your operation. Consider factors like horsepower, lift capacity, and dimensions.

Which has a higher power output, the Allis Chalmers 7000 or the John Deere 30A?

The Allis Chalmers 7000 has a higher power output at 117 hp, compared to the John Deere 30A's 25 hp.

Which has a higher rated rpm, the Allis Chalmers 7000 or the John Deere 30A?

The John Deere 30A has a higher rated rpm at 2,800 RPM, compared to the Allis Chalmers 7000's 2,200 RPM.

Which has a higher displacement, the Allis Chalmers 7000 or the John Deere 30A?

The Allis Chalmers 7000 has a higher displacement at 301 ci, compared to the John Deere 30A's 76.2 ci.

Which has a higher bore, the Allis Chalmers 7000 or the John Deere 30A?

The Allis Chalmers 7000 has a higher bore at 3.875 in, compared to the John Deere 30A's 3.74 in.

Which has a higher stroke, the Allis Chalmers 7000 or the John Deere 30A?

The Allis Chalmers 7000 has a higher stroke at 4.25 in, compared to the John Deere 30A's 3.46 in.