Tool CarrierSpec sheet
Deutz-Fahr Intrac 6.60
The Deutz-Fahr Intrac 6.60 is a powerful tool carrier tractor made from 1987 to 1990. It has a strong 4-wheel drive system and a big engine that can handle tough farm work. The tractor has 30 forward gears and 10 reverse gears, giving the driver lots of options for different tasks. Under the hood, there's a Deutz BF6L913 engine with 6 cylinders. It's air-cooled and runs on diesel fuel. The engine is turbocharged, which means it has extra power. It can produce 150 horsepower at 2300 RPM, making it great for heavy-duty jobs. The tractor is big, measuring about 205 inches long, 94 inches wide, and 125 inches tall. It weighs a hefty 13,889 pounds, which helps it stay stable during work. The Intrac 6.60 rides on large 18.4-34 radial tires on both front and back, giving it good traction in the fields.
ManufacturerDeutz-FahrPower150 hp(111.9 kW)Class150–300 HP tractors →Engine6-cylinderTransmissionShift Gear
Image not recorded
Key specifications
- Category
- Tool Carrier
- Engine power
- 150hp
- Operating weight
- 13,889 lb
- Transmission
- Shift Gear
Category comparison
Intrac 6.60 compared with its category
vs. Tool Carrier medianOverview
About the Deutz-Fahr Intrac 6.60
The Deutz-Fahr Intrac 6.60 is a powerful tool carrier tractor made from 1987 to 1990. It has a strong 4-wheel drive system and a big engine that can handle tough farm work. The tractor has 30 forward gears and 10 reverse gears, giving the driver lots of options for different tasks. Under the hood, there's a Deutz BF6L913 engine with 6 cylinders. It's air-cooled and runs on diesel fuel. The engine is turbocharged, which means it has extra power. It can produce 150 horsepower at 2300 RPM, making it great for heavy-duty jobs. The tractor is big, measuring about 205 inches long, 94 inches wide, and 125 inches tall. It weighs a hefty 13,889 pounds, which helps it stay stable during work. The Intrac 6.60 rides on large 18.4-34 radial tires on both front and back, giving it good traction in the fields.
Full specifications
Recorded specifications
General
| Manufacturer | Deutz-Fahr |
|---|---|
| Model | Intrac 6.60 |
| Category | Tool Carrier tractor |
| Type | 4x4 |
| Years built | 1987–1990 |
| Operating weight | 13,889lb(6,300 kg) |
Engine
| Make | Deutz |
|---|---|
| Model | BF6L913 |
| Power | 150hp(111.9 kW) |
| Cylinders | 6 |
| Displacement | 373.9ci(6.13 L) |
| Bore | 4.02in(102.1 mm) |
| Stroke | 4.92in(125 mm) |
Transmission
| Type | Shift Gear |
|---|---|
| Forward gears | 30 |
| Reverse gears | 10 |
Chassis & drive
| Chassis | 4x4 |
|---|---|
| Drive | 4WD |
Dimensions
| Length | 204.7in(5,199 mm) |
|---|---|
| Width | 94.1in(2,390 mm) |
| Height | 125.2in(3,180 mm) |
| Operating weight | 13,889lb(6,300 kg) |
Tires
| Front | 18.4-34Convert |
|---|---|
| Rear | 18.4-34Convert |
Closest alternatives
Intrac 6.60 compared with the nearest models by horsepower
Among tool carrier tractors, the Fendt Xylon 524 and the Deutz-Fahr Intrac 6.30 are closest to the Deutz-Fahr Intrac 6.60 in rated horsepower. The Fendt Xylon 524 is rated 3 hp lower and weighs 1,010 lb more, at 101 lb per horsepower against 93 lb. The Deutz-Fahr Intrac 6.30 makes 24 hp less and weighs 150 lb less, so it carries more weight per horsepower, which helps traction in draft work. Of the 3 models, the Intrac 6.60 has the lowest weight per horsepower at 93 lb per hp.
| Spec | Deutz-Fahr Intrac 6.60 | Fendt Xylon 524 | Deutz-Fahr Intrac 6.30 |
|---|---|---|---|
| Engine power | 150 hp111.9 kW | 147 hp109.6 kW | 126 hp94 kW |
| Operating weight | 13,889 lb6,300 kg | 14,894 lb6,756 kg | 13,735 lb6,230 kg |
| Weight per hp | 93 lb/hp56 kg/kW | 101 lb/hp62 kg/kW | 109 lb/hp66 kg/kW |
| Displacement | 373.9 ci6.13 L | 279.5 ci4.58 L | 373.9 ci6.13 L |
| Cylinders | 6 | 4 | 6 |
| Transmission | Shift Gear | - | 15-speed |
| Drive | 4WD | 4WD | 4WD |
Calculators
Calculators for the Intrac 6.60
PTO power
About 125 to 135 PTO hp
Estimated from the 150 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 150 hp tractor can run
Maximum size is about a 18 ft rotary cutter or a 15 ft tiller. The calculator also sizes discs, plows and balers.
Ballast
108 lb per PTO hp as listed
Heavy draft work calls for 120 to 135 lb/hp. The calculator gives the ballast to add.
Units
150 hp is 111.9 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Tires
Convert the 18.4-34 tire size
The calculator gives diameter, rolling circumference and the metric or inch equivalent.
Category medians
Intrac 6.60 vs. Tool Carrier median
Same manufacturer
Other Deutz-Fahr models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
When was the Deutz-Fahr Intrac 6.60 made?
The Deutz-Fahr Intrac 6.60 was manufactured from 1987 to 1990.
What is the engine power output of the Deutz-Fahr Intrac 6.60?
Rated engine output for the Deutz-Fahr Intrac 6.60 is 150 hp, delivered by a 6-cylinder engine. The engine displaces 373.9 ci.
What is the operating weight of the Deutz-Fahr Intrac 6.60?
The Deutz-Fahr Intrac 6.60 has an operating weight of about 13,889 lb.
Which transmission does the Deutz-Fahr Intrac 6.60 use?
The Deutz-Fahr Intrac 6.60 is equipped with a Shift Gear transmission with 30 forward gears.
What are the factory tire sizes for the Deutz-Fahr Intrac 6.60?
The Deutz-Fahr Intrac 6.60 comes with 18.4-34 front tires and 18.4-34 rear tires.
How do I maintain a Deutz-Fahr Intrac 6.60?
Routine service for the Deutz-Fahr Intrac 6.60 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.