Row Crop
Farmall 130
The Farmall 130 is a row crop tractor made from 1956 to 1958. It's a small, lightweight tractor, weighing just 2,800 lb. This makes it easy to move around the farm. The tractor is 107 inches long, 56 inches wide, and 65 inches tall. The Farmall 130 has a 4-cylinder gasoline engine made by International Harvester. The engine is liquid-cooled and runs at 1,400 rpm. It has a below-average displacement of 122.7 cubic inches. The tractor has a manual steering system and a sliding gear transmission with 4 forward gears and 1 reverse gear. It has a rear-mounted PTO that spins at 540 rpm. The tractor uses an IH Fast-Hitch system with one arm at the back for attaching tools. It has an open operator station and runs on agricultural tires. The fuel tank holds 11 US gallons, and the coolant system needs 15 quarts.
ManufacturerFarmallEngine4-cylTransSliding gear
Image not recorded
Quick specs
- Category
- Row Crop
- Operating Weight
- 2,800 lb
- Transmission
- Sliding gear
Overview
About the Farmall 130
The Farmall 130 is a row crop tractor made from 1956 to 1958. It's a small, lightweight tractor, weighing just 2,800 lb. This makes it easy to move around the farm. The tractor is 107 inches long, 56 inches wide, and 65 inches tall. The Farmall 130 has a 4-cylinder gasoline engine made by International Harvester. The engine is liquid-cooled and runs at 1,400 rpm. It has a below-average displacement of 122.7 cubic inches. The tractor has a manual steering system and a sliding gear transmission with 4 forward gears and 1 reverse gear. It has a rear-mounted PTO that spins at 540 rpm. The tractor uses an IH Fast-Hitch system with one arm at the back for attaching tools. It has an open operator station and runs on agricultural tires. The fuel tank holds 11 US gallons, and the coolant system needs 15 quarts.
Full specifications
Every recorded spec
General
| Manufacturer | Farmall |
|---|---|
| Model | 130 |
| Category | Row Crop tractor |
| Type | 4x2 2WD |
| Years built | 1956–1958 |
| Operating weight | 2,800lb |
Engine
| Make | International Harvester |
|---|---|
| Model | C-123 |
| Cylinders | 4 |
| Displacement | 122.7ci |
| Bore | 3.11in |
| Stroke | 4.02in |
Transmission
| Type | Sliding gear |
|---|---|
| Forward gears | 4 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Manual |
| Brakes | Differential mechanical contracting band |
| Cab | Open |
Power take-off
| PTO speed | 540rpm |
|---|
Dimensions
| Length | 107in |
|---|---|
| Width | 56in |
| Height | 65in |
| Operating weight | 2,800lb |
Capacities
| Cooling system | 3.75gal |
|---|
Head to head
130 vs. Row Crop median
How the Farmall 130 compares to other Row Crop tractors
| Spec | This model | Row Crop median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 123 ci | 391 ci | -69% | 2nd |
| Cylinders | 4 | 6 | -33% | 17th |
| Forward Gears | 4 | 16 | -75% | 4th |
| Operating Weight | 2,800 lb | 12,307 lb | -77% | 2nd |
| Length | 107 in | 180 in | -40% | 1st |
| Width | 56 in | 91.2 in | -39% | 2nd |
| Height | 65 in | 114 in | -43% | 5th |
Medians and percentiles are computed from the row crop tractors in our database with a recorded value for each spec (sample sizes 806–1,417 models).
Compare to tractors with similar specs
Commonly compared Farmall tractors
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| Farmall 100 | — | 3,000 lb | 1954–1956 | Compare → |
| Farmall 1066 | 108 hp | 12,150 lb | 1971–1976 | Compare → |
| Farmall 1206 | 110 hp | 10,115 lb | 1965–1967 | Compare → |
| Farmall 1256 | 113 hp | 10,405 lb | 1967–1969 | Compare → |
| Farmall 1456 | 130 hp | 12,800 lb | 1969–1971 | Compare → |
Commonly compared tractors with similar horsepower from other brands
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| Advance-Rumely 6A | — | 6,370 lb | — | Compare → |
| Advance-Rumely DoAll | — | 3,702 lb | — | Compare → |
| Advance-Rumely OilPull B 25/45 | — | 25,000 lb | — | Compare → |
| Advance-Rumely OilPull E 30/60 | — | 26,300 lb | — | Compare → |
| Advance-Rumely OilPull F 15/30 | — | 16,500 lb | — | Compare → |
Explore
Farmall siblings
Explore
Similar-spec models
FAQ
Common questions
What years was the Farmall 130 manufactured?
Production of the Farmall 130 ran from 1956 through 1958.
What type of transmission does the Farmall 130 have?
The Farmall 130 uses a Sliding gear transmission offering 4 forward gears.
What engine configuration does the Farmall 130 use?
The Farmall 130 is equipped with a 4-cylinder engine displacing 122.7 ci.
What is the working weight of the Farmall 130?
The operating weight of the Farmall 130 is approximately 2,800 lb.
What routine service does the Farmall 130 need?
Regular maintenance for the Farmall 130 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.