Ford 6810 Mark III
The Ford 6810 Mark III is a powerful 2WD tractor designed for farm work. It has a 4-cylinder diesel engine made by Ford that uses a turbocharger to boost power. The engine is liquid-cooled and has a displacement of 268.1 cubic inches. This tractor is built tough, weighing 7,280 pounds and measuring 145.2 inches long. The 6810 Mark III comes with a Dual Power transmission that offers 16 forward gears and 8 reverse gears. This gives farmers lots of options for different tasks. The tractor has power steering to make it easier to control. It uses an open center hydraulic system with closed-center valves, which helps run attachments. The hitch is category II, good for many farm implements. For safety, it has a ROPS (Roll-Over Protective Structure) to protect the driver. The tractor also has good ground clearance at 17.3 inches, helping it work well in rough fields.
ManufacturerFordEngine4-cylinder
Image not recorded
Key specifications
- Category
- Agricultural
- Operating weight
- 7,280 lb
Overview
About the Ford 6810 Mark III
The Ford 6810 Mark III is a powerful 2WD tractor designed for farm work. It has a 4-cylinder diesel engine made by Ford that uses a turbocharger to boost power. The engine is liquid-cooled and has a displacement of 268.1 cubic inches. This tractor is built tough, weighing 7,280 pounds and measuring 145.2 inches long. The 6810 Mark III comes with a Dual Power transmission that offers 16 forward gears and 8 reverse gears. This gives farmers lots of options for different tasks. The tractor has power steering to make it easier to control. It uses an open center hydraulic system with closed-center valves, which helps run attachments. The hitch is category II, good for many farm implements. For safety, it has a ROPS (Roll-Over Protective Structure) to protect the driver. The tractor also has good ground clearance at 17.3 inches, helping it work well in rough fields.
Full specifications
Recorded specifications
General
| Manufacturer | Ford |
|---|---|
| Model | 6810 Mark III |
| Category | Agricultural tractor |
| Type | 4x2 2WD |
| Operating weight | 7,280lb(3,302 kg) |
Engine
| Make | Ford |
|---|---|
| Cylinders | 4 |
| Displacement | 268.1ci(4.39 L) |
| Bore | 4.4in(111.8 mm) |
| Stroke | 4.4in(111.8 mm) |
Transmission
| Forward gears | 16 |
|---|---|
| Reverse gears | 8 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Power |
| Cab | ROPS |
Hydraulics
| Type | Open Center with Closed-Center Valves |
|---|
Dimensions
| Length | 145.2in(3,688 mm) |
|---|---|
| Operating weight | 7,280lb(3,302 kg) |
Category medians
6810 Mark III vs. Agricultural median
Ford 6810 Mark III compared with other Agricultural tractors
| Spec | This model | Agricultural median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 268 ci | 336 ci | -20% | 37th |
| Cylinders | 4 | 5.5 | -27% | 31st |
| Forward Gears | 16 | 16 | at median | 50th |
| Operating Weight | 7,280 lb | 10,914 lb | -33% | 26th |
| Length | 145 in | 173 in | -16% | 22nd |
Medians and percentiles are calculated from the agricultural tractors in the database that have a recorded value for each specification (sample size 829–1,130 models).
Same manufacturer
Other Ford models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
How many cylinders does the Ford 6810 Mark III have?
The Ford 6810 Mark III runs a 4-cylinder engine with a displacement of 268.1 ci.
What hitch category is the Ford 6810 Mark III?
The Ford 6810 Mark III uses a Category II hitch.
What is the working weight of the Ford 6810 Mark III?
The operating weight of the Ford 6810 Mark III is approximately 7,280 lb.
What type of hydraulic system does the Ford 6810 Mark III use?
Hydraulics on the Ford 6810 Mark III are Open Center with Closed-Center Valves.
What routine service does the Ford 6810 Mark III need?
Regular maintenance for the Ford 6810 Mark III includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.