Same brandInternational Harvester 300
The International Harvester 300 is a utility tractor that was made from 1955 to 1956. It's a 2WD tractor with a 4x2 chassis, which means it has two wheels in the front and two in the back. The tractor has a sliding gear transmission with 5 forward gears and 1 reverse gear, giving the driver good control over speed. This tractor has a gasoline engine made by International Harvester. The engine, called the C169, has 4 cylinders lined up in a row and is cooled by liquid. It has an average engine size for tractors of its time. The engine runs at 2000 rpm, which is on the lower side compared to other tractors. The 300 model weighs 4313 lb, which is about average for its class. It's 119 inches long, 65 inches wide, and 57.9 inches tall. The tractor has an open operator station, which means there's no cab, and it uses an electric starter to get the engine going.

Key specifications
- Category
- Utility
- Operating weight
- 4,313 lb
- Transmission
- Sliding gear
Overview
About the International Harvester 300
The International Harvester 300 is a utility tractor that was made from 1955 to 1956. It's a 2WD tractor with a 4x2 chassis, which means it has two wheels in the front and two in the back. The tractor has a sliding gear transmission with 5 forward gears and 1 reverse gear, giving the driver good control over speed. This tractor has a gasoline engine made by International Harvester. The engine, called the C169, has 4 cylinders lined up in a row and is cooled by liquid. It has an average engine size for tractors of its time. The engine runs at 2000 rpm, which is on the lower side compared to other tractors. The 300 model weighs 4313 lb, which is about average for its class. It's 119 inches long, 65 inches wide, and 57.9 inches tall. The tractor has an open operator station, which means there's no cab, and it uses an electric starter to get the engine going.
Full specifications
Recorded specifications
General
| Manufacturer | International Harvester |
|---|---|
| Model | 300 |
| Category | Utility tractor |
| Type | 4x2 2WD |
| Years built | 1955–1956 |
| Operating weight | 4,313lb(1,956 kg) |
Engine
| Make | International Harvester |
|---|---|
| Model | C169 |
| Cylinders | 4 |
| Displacement | 169ci(2.77 L) |
| Bore | 3.54in(89.92 mm) |
| Stroke | 4.25in(107.9 mm) |
Transmission
| Type | Sliding gear |
|---|---|
| Forward gears | 5 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Brakes | Differential mechanical disc |
| Cab | Open operator station |
Power take-off
| Rear PTO | Transmission |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Length | 119in(3,023 mm) |
|---|---|
| Width | 65in(1,651 mm) |
| Height | 57.9in(1,471 mm) |
| Operating weight | 4,313lb(1,956 kg) |
Tires
| Front | 5.50-16ConvertShop size |
|---|---|
| Rear | 10.00-28ConvertShop size |
Capacities
| Cooling system | 4.13gal(15.63 L) |
|---|
Calculators
Calculators for the 300
Parts and manuals
Parts and manuals for the International Harvester 300
Each link opens a retailer search keyed to the fields recorded for this model. Confirm fitment against the serial plate before ordering.
Filters
- Oil filter for the International Harvester C169Amazon
Fits the International Harvester C169 4-cylinder gasoline engine listed for this model. Confirm the part number against the engine serial plate.
- Air filter for the International Harvester C169Amazon
Fits the International Harvester C169 4-cylinder gasoline engine listed for this model. Confirm the part number against the engine serial plate.
- Fuel filter for the International Harvester C169Amazon
Fits the International Harvester C169 4-cylinder gasoline engine listed for this model. Confirm the part number against the engine serial plate.
- Hydraulic filter for the International Harvester C169Amazon
Fits the International Harvester C169 4-cylinder gasoline engine listed for this model. Confirm the part number against the engine serial plate.
Manuals
- International Harvester 300 service and repair manualseManualOnline
Digital manuals. Built 1955 to 1956. Check the serial number range on the listing.
- International Harvester 300 operator's manualAmazon
Printed and reprint manuals. Built 1955 to 1956. Check the serial number range on the listing.
- International Harvester 300 service manualAmazon
Shop and repair manuals for this model.
Tires
- 5.50-16 tiresAmazon
Listed front tire size for the International Harvester 300.
- 10.00-28 tiresAmazon
Listed rear tire size for the International Harvester 300.
Links in this section go to retailers. A purchase through them earns this site a commission at no extra cost to the buyer. As an Amazon Associate, Heavy Equipment Specs earns from qualifying purchases. Affiliate disclosure
Category medians
300 vs. Utility median
International Harvester 300 compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 169 ci | 183 ci | -8% | 45th |
| Cylinders | 4 | 4 | at median | 50th |
| Forward Gears | 5 | 12 | -58% | 6th |
| Operating Weight | 4,313 lb | 5,303 lb | -19% | 41st |
| Length | 119 in | 137 in | -13% | 26th |
| Width | 65 in | 66 in | -2% | 48th |
| Height | 57.9 in | 94.1 in | -38% | 8th |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 3,933–5,720 models).
Same manufacturer
Other International Harvester models
Other manufacturers
Models with similar horsepower
Gallery
International Harvester 300 photos




FAQ
Frequently asked questions
When was the International Harvester 300 made?
The International Harvester 300 was manufactured from 1955 to 1956.
What is the operating weight of the International Harvester 300?
The International Harvester 300 has an operating weight of about 4,313 lb.
Which transmission does the International Harvester 300 use?
The International Harvester 300 is equipped with a Sliding gear transmission with 5 forward gears.
What size tires does the International Harvester 300 use?
The International Harvester 300 is fitted with 5.50-16 front tires and 10.00-28 rear tires from the factory.
How many cylinders does the International Harvester 300 have?
The International Harvester 300 runs a 4-cylinder engine with a displacement of 169 ci.
How do I maintain a International Harvester 300?
Routine service for the International Harvester 300 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.



