Same brandInternational Harvester 350
The International Harvester 350 is a utility tractor made from 1956 to 1958. It's a 2-wheel drive machine with a manual steering system. The tractor has a 5-speed sliding gear transmission with one reverse gear, making it easy to use in different farm tasks. Under the hood, the 350 has a Continental D193 diesel engine. This 4-cylinder engine is liquid-cooled and naturally aspirated. It has an average displacement of 193 cubic inches and runs at 2000 rpm. The tractor weighs 4595 pounds, which is about average for its class. It measures 118.9 inches long, 63.8 inches wide, and 58.7 inches tall. The 350 comes with an IH Fast Hitch system at the rear and an independent PTO that spins at 540 rpm. It also has an open center hydraulic system and an open operator station. Some models were available with a torque amplifier for extra pulling power.
Image not recorded
Key specifications
- Category
- Utility
- Operating weight
- 4,595 lb
- Transmission
- Sliding Gear
Overview
About the International Harvester 350
The International Harvester 350 is a utility tractor made from 1956 to 1958. It's a 2-wheel drive machine with a manual steering system. The tractor has a 5-speed sliding gear transmission with one reverse gear, making it easy to use in different farm tasks. Under the hood, the 350 has a Continental D193 diesel engine. This 4-cylinder engine is liquid-cooled and naturally aspirated. It has an average displacement of 193 cubic inches and runs at 2000 rpm. The tractor weighs 4595 pounds, which is about average for its class. It measures 118.9 inches long, 63.8 inches wide, and 58.7 inches tall. The 350 comes with an IH Fast Hitch system at the rear and an independent PTO that spins at 540 rpm. It also has an open center hydraulic system and an open operator station. Some models were available with a torque amplifier for extra pulling power.
Full specifications
Recorded specifications
General
| Manufacturer | International Harvester |
|---|---|
| Model | 350 |
| Category | Utility tractor |
| Type | 4x2 |
| Years built | 1956–1958 |
| Operating weight | 4,595lb(2,084 kg) |
Engine
| Make | Continental |
|---|---|
| Model | D193 |
| Cylinders | 4 |
| Displacement | 193ci(3.16 L) |
| Bore | 3.74in(95 mm) |
| Stroke | 4.37in(111 mm) |
Transmission
| Type | Sliding Gear |
|---|---|
| Forward gears | 5 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 |
|---|---|
| Drive | 2WD |
| Steering | Manual |
| Cab | Open |
Hydraulics
| Type | Open Center |
|---|
Power take-off
| Rear PTO | Independent |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Length | 118.9in(3,020 mm) |
|---|---|
| Width | 63.8in(1,621 mm) |
| Height | 58.7in(1,491 mm) |
| Operating weight | 4,595lb(2,084 kg) |
Capacities
| Cooling system | 4gal(15.14 L) |
|---|
Category medians
350 vs. Utility median
International Harvester 350 compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 193 ci | 183 ci | +5% | 51st |
| Cylinders | 4 | 4 | at median | 50th |
| Forward Gears | 5 | 12 | -58% | 6th |
| Operating Weight | 4,595 lb | 5,303 lb | -13% | 44th |
| Length | 119 in | 137 in | -13% | 25th |
| Width | 63.8 in | 66 in | -3% | 44th |
| Height | 58.7 in | 94.1 in | -38% | 9th |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 3,933–5,720 models).
Same manufacturer
Other International Harvester models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
When was the International Harvester 350 in production?
International Harvester 350 production started in 1956 and ended in 1958.
What engine configuration does the International Harvester 350 use?
The International Harvester 350 is equipped with a 4-cylinder engine displacing 193 ci.
How much does the International Harvester 350 weigh?
The International Harvester 350 weighs about 4,595 lb in operating condition.
What transmission is in the International Harvester 350?
Transmission on the International Harvester 350 is Sliding Gear, with 5 forward speeds.
What hydraulics does the International Harvester 350 have?
The International Harvester 350 uses an Open Center hydraulic system.
What maintenance does the International Harvester 350 require?
The International Harvester 350 needs periodic engine oil and filter changes, hydraulic fluid checks, and regular greasing and inspection. The owner's manual lists the manufacturer's recommended service intervals.