Same brandInternational Harvester 8-16
The International Harvester 8-16 tractor is a sturdy machine built for farm work. It has a 4-cylinder kerosene engine with a displacement of 251 cubic inches. The engine's bore is 4.125 inches and its stroke is 5 inches. It runs at 1000 rpm, which is good for steady work in the fields. The tractor has an unsynchronized gear transmission with 3 forward gears and 1 reverse gear. This gives the farmer options for different tasks. It's a big tractor, measuring 132 inches long, 54 inches wide, and 65 inches tall. It weighs 3660 pounds, which helps it grip the ground well. The tractor has steel wheels instead of rubber tires, with 32-inch wheels in front and 40-inch wheels in back. This design was common for older tractors and works well on firm ground.
Key specifications
- Category
- Standard Tread
- Operating weight
- 3,660 lb
- Transmission
- Unsynchronized Gear
Overview
About the International Harvester 8-16
The International Harvester 8-16 tractor is a sturdy machine built for farm work. It has a 4-cylinder kerosene engine with a displacement of 251 cubic inches. The engine's bore is 4.125 inches and its stroke is 5 inches. It runs at 1000 rpm, which is good for steady work in the fields. The tractor has an unsynchronized gear transmission with 3 forward gears and 1 reverse gear. This gives the farmer options for different tasks. It's a big tractor, measuring 132 inches long, 54 inches wide, and 65 inches tall. It weighs 3660 pounds, which helps it grip the ground well. The tractor has steel wheels instead of rubber tires, with 32-inch wheels in front and 40-inch wheels in back. This design was common for older tractors and works well on firm ground.
Full specifications
Recorded specifications
General
| Manufacturer | International Harvester |
|---|---|
| Model | 8-16 |
| Category | Standard Tread tractor |
| Years built | 1917–1922 |
| Operating weight | 3,660lb(1,660 kg) |
Engine
| Make | International Harvester |
|---|---|
| Cylinders | 4 |
| Displacement | 251ci(4.11 L) |
| Bore | 4.13in(104.8 mm) |
| Stroke | 5in(127 mm) |
Transmission
| Type | Unsynchronized Gear |
|---|---|
| Forward gears | 3 |
| Reverse gears | 1 |
Dimensions
| Length | 132in(3,353 mm) |
|---|---|
| Width | 54in(1,372 mm) |
| Height | 65in(1,651 mm) |
| Operating weight | 3,660lb(1,660 kg) |
Parts and manuals
Parts and manuals for the International Harvester 8-16
Each link opens a retailer search keyed to the fields recorded for this model. Confirm fitment against the serial plate before ordering.
Filters
- Oil filter for the International HarvesterAmazon
Fits the International Harvester 4-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Air filter for the International HarvesterAmazon
Fits the International Harvester 4-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Fuel filter for the International HarvesterAmazon
Fits the International Harvester 4-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Hydraulic filter for the International HarvesterAmazon
Fits the International Harvester 4-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
Manuals
- International Harvester 8-16 service and repair manualseManualOnline
Digital manuals. Built 1917 to 1922. Check the serial number range on the listing.
- International Harvester 8-16 operator's manualAmazon
Printed and reprint manuals. Built 1917 to 1922. Check the serial number range on the listing.
- International Harvester 8-16 service manualAmazon
Shop and repair manuals for this model.
Links in this section go to retailers. A purchase through them earns this site a commission at no extra cost to the buyer. As an Amazon Associate, Heavy Equipment Specs earns from qualifying purchases. Affiliate disclosure
Category medians
8-16 vs. Standard Tread median
International Harvester 8-16 compared with other Standard Tread tractors
| Spec | This model | Standard Tread median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 251 ci | 382 ci | -34% | 22nd |
| Cylinders | 4 | 4 | at median | 50th |
| Forward Gears | 3 | 4 | -25% | 39th |
| Operating Weight | 3,660 lb | 6,834 lb | -46% | 9th |
| Length | 132 in | 137 in | -4% | 35th |
| Width | 54 in | 72.4 in | -25% | 5th |
| Height | 65 in | 72.3 in | -10% | 28th |
Medians and percentiles are calculated from the standard tread tractors in the database that have a recorded value for each specification (sample size 233–367 models).
Same manufacturer
Other International Harvester models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What years was the International Harvester 8-16 manufactured?
Production of the International Harvester 8-16 ran from 1917 through 1922.
What type of transmission does the International Harvester 8-16 have?
The International Harvester 8-16 uses an Unsynchronized Gear transmission offering 3 forward gears.
What engine configuration does the International Harvester 8-16 use?
The International Harvester 8-16 is equipped with a 4-cylinder engine displacing 251 ci.
What is the working weight of the International Harvester 8-16?
The operating weight of the International Harvester 8-16 is approximately 3,660 lb.
What routine service does the International Harvester 8-16 need?
Regular maintenance for the International Harvester 8-16 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.


