Row Crop
John Deere 50
The John Deere 50 is a row crop tractor that was made from 1952 to 1956. It has a 2WD drive system and a manual steering type. This tractor is powered by a John Deere gasoline engine with 2 cylinders. The engine is liquid-cooled and has natural aspiration. It has a below-average displacement of 190.4 ci and runs at 1250 rpm, which is quite low compared to other tractors. The John Deere 50 has a 6-speed forward and 1-speed reverse transmission. It features a rear PTO that spins at 532 rpm. The tractor has an open operator station and uses an electric starter. It weighs 4855 lb, which is on the lighter side for tractors. The tractor measures 132.7 inches long, 86.6 inches wide, and 59.4 inches tall. It has agricultural tires in both front and rear, with the front tires being 16 inches in diameter and 5.5 inches wide.
ManufacturerJohn DeereEngine2-cylTransUnsynchronized gear
Image not recorded
Quick specs
- Category
- Row Crop
- Operating Weight
- 4,855 lb
- Transmission
- Unsynchronized gear
Overview
About the John Deere 50
The John Deere 50 is a row crop tractor that was made from 1952 to 1956. It has a 2WD drive system and a manual steering type. This tractor is powered by a John Deere gasoline engine with 2 cylinders. The engine is liquid-cooled and has natural aspiration. It has a below-average displacement of 190.4 ci and runs at 1250 rpm, which is quite low compared to other tractors. The John Deere 50 has a 6-speed forward and 1-speed reverse transmission. It features a rear PTO that spins at 532 rpm. The tractor has an open operator station and uses an electric starter. It weighs 4855 lb, which is on the lighter side for tractors. The tractor measures 132.7 inches long, 86.6 inches wide, and 59.4 inches tall. It has agricultural tires in both front and rear, with the front tires being 16 inches in diameter and 5.5 inches wide.
Full specifications
Every recorded spec
General
| Manufacturer | John Deere |
|---|---|
| Model | 50 |
| Category | Row Crop tractor |
| Type | 4x2 2WD |
| Years built | 1952–1956 |
| Operating weight | 4,855lb |
Engine
| Make | John Deere |
|---|---|
| Cylinders | 2 |
| Displacement | 190.4ci |
| Bore | 4.69in |
| Stroke | 5.51in |
Transmission
| Type | Unsynchronized gear |
|---|---|
| Forward gears | 6 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Manual |
| Brakes | Expanding shoe |
| Cab | Open |
Hydraulics
| Type | Open center |
|---|
Power take-off
| Rear PTO | Rear PTO |
|---|---|
| PTO speed | 532rpm |
Dimensions
| Length | 132.7in |
|---|---|
| Width | 86.6in |
| Height | 59.4in |
| Operating weight | 4,855lb |
Capacities
| Cooling system | 5.75gal |
|---|
Head to head
50 vs. Row Crop median
How the John Deere 50 compares to other Row Crop tractors
| Spec | This model | Row Crop median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 190 ci | 391 ci | -51% | 6th |
| Cylinders | 2 | 6 | -67% | 1st |
| Forward Gears | 6 | 16 | -62% | 11th |
| Operating Weight | 4,855 lb | 12,307 lb | -61% | 7th |
| Length | 133 in | 180 in | -26% | 8th |
| Width | 86.6 in | 91.2 in | -5% | 40th |
| Height | 59.4 in | 114 in | -48% | 2nd |
Medians and percentiles are computed from the row crop tractors in our database with a recorded value for each spec (sample sizes 806–1,417 models).
Compare to tractors with similar specs
Commonly compared John Deere tractors
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| John Deere 1750 | 50 hp | 6,000 lb | — | Compare → |
| John Deere 1830 | 68 hp | 5,600 lb | — | Compare → |
| John Deere 2010 | — | 5,049 lb | 1960–1965 | Compare → |
| John Deere 2020 | 59.9 hp | 5,770 lb | 1965–1971 | Compare → |
| John Deere 2120 | 68 hp | 6,615 lb | 1969–1972 | Compare → |
Commonly compared tractors with similar horsepower from other brands
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| Advance-Rumely 6A | — | 6,370 lb | — | Compare → |
| Advance-Rumely DoAll | — | 3,702 lb | — | Compare → |
| Advance-Rumely OilPull B 25/45 | — | 25,000 lb | — | Compare → |
| Advance-Rumely OilPull E 30/60 | — | 26,300 lb | — | Compare → |
| Advance-Rumely OilPull F 15/30 | — | 16,500 lb | — | Compare → |
Explore
John Deere siblings
Explore
Similar-spec models
FAQ
Common questions
When was the John Deere 50 made?
The John Deere 50 was manufactured from 1952 to 1956.
What is the operating weight of the John Deere 50?
In working trim, the John Deere 50 comes in at roughly 4,855 lb.
Which transmission does the John Deere 50 use?
The John Deere 50 is equipped with an Unsynchronized gear transmission with 6 forward gears.
What type of hydraulic system does the John Deere 50 use?
Hydraulics on the John Deere 50 are Open center.
How many cylinders does the John Deere 50 have?
The John Deere 50 runs a 2-cylinder engine with a displacement of 190.4 ci.
How do I maintain a John Deere 50?
Routine service for the John Deere 50 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.