Utility tractorsSpec sheet
John Deere 5055E (2008-2012)
The John Deere 5055E is a utility tractor made from 2008 to 2012. It's a strong helper on the farm with its 55 horsepower engine. This tractor has four-wheel drive, which means it can handle tough ground and heavy loads. It has a 9-speed forward and 3-speed reverse transmission, giving the driver good control over speed. The 5055E has a John Deere PowerTech engine with three cylinders. It's liquid-cooled and runs on diesel fuel. The engine size is average for tractors like this. It has a strong lift capacity of 3,190 pounds, which is very high compared to other tractors. This means it can lift heavy tools and equipment easily. The tractor has a 540 rpm PTO, which is useful for running various farm tools. It also has an open center hydraulic system and power steering to make it easier to use.
ManufacturerJohn DeerePower55 hp(41.0 kW)Class40–60 HP tractors →Engine3-cylinderTransmissionPartially synchronized
Image not recorded
Key specifications
- Category
- Utility
- Engine power
- 55hp
- Transmission
- Partially synchronized
Category comparison
5055E (2008-2012) compared with its category
vs. Utility medianDistribution
Engine Power (hp)
All recorded Utility tractors
55 hp · 50th
This model
9
Median 55 hp
177
This modelUtility tractorsMediann = 5,383
The 5055E (2008-2012) ranks at the 50th percentile for engine power among recorded utility tractors.
Overview
About the John Deere 5055E (2008-2012)
The John Deere 5055E is a utility tractor made from 2008 to 2012. It's a strong helper on the farm with its 55 horsepower engine. This tractor has four-wheel drive, which means it can handle tough ground and heavy loads. It has a 9-speed forward and 3-speed reverse transmission, giving the driver good control over speed. The 5055E has a John Deere PowerTech engine with three cylinders. It's liquid-cooled and runs on diesel fuel. The engine size is average for tractors like this. It has a strong lift capacity of 3,190 pounds, which is very high compared to other tractors. This means it can lift heavy tools and equipment easily. The tractor has a 540 rpm PTO, which is useful for running various farm tools. It also has an open center hydraulic system and power steering to make it easier to use.
Full specifications
Recorded specifications
General
| Manufacturer | John Deere |
|---|---|
| Model | 5055E (2008-2012) |
| Category | Utility tractor |
| Type | 4x4 MFWD 4WD |
| Years built | 2008–2012 |
Engine
| Make | John Deere |
|---|---|
| Model | PowerTech 3029H |
| Power | 55hp(41.01 kW) |
| Cylinders | 3 |
| Displacement | 179ci(2.93 L) |
| Bore | 4.17in(105.9 mm) |
| Stroke | 4.33in(110 mm) |
Transmission
| Type | Partially synchronized |
|---|---|
| Forward gears | 9 |
| Reverse gears | 3 |
Chassis & drive
| Chassis | 4x4 MFWD 4WD |
|---|---|
| Drive | 4WD |
| Steering | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Cab | Two-post foldable ROPS |
Hydraulics
| Type | Open center |
|---|
Power take-off
| Rear PTO | Independent with mechanical clutch |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Length | 137.8in(3,500 mm) |
|---|---|
| Width | 57.1in(1,450 mm) |
| Height | 94.5in(2,400 mm) |
Capacities
| Cooling system | 2.5gal(9.46 L) |
|---|
Closest alternatives
5055E (2008-2012) compared with the nearest models by horsepower
Among utility tractors, the John Deere 5055E (2013-2014) and the John Deere 5055D are closest to the John Deere 5055E (2008-2012) in rated horsepower. The John Deere 5055E (2013-2014) matches it on rated power. It entered production in 2013, 5 years after the 5055E (2008-2012). The John Deere 5055D matches it on rated power.
| Spec | John Deere 5055E (2008-2012) | John Deere 5055E (2013-2014) | John Deere 5055D |
|---|---|---|---|
| Engine power | 55 hp41 kW | 55 hp41 kW | 55 hp41 kW |
| Displacement | 179 ci2.93 L | 179 ci2.93 L | 179 ci2.93 L |
| Cylinders | 3 | 3 | 3 |
| Transmission | Partially synchronized | Partially synchronized with dry disc clutch | Partially synchronized with dry disc clutch |
| Drive | 4WD | MFWD | 2WD |
| Years built | 2008-2012 | 2013-2014 | 2008-2014 |
Calculators
Calculators for the 5055E (2008-2012)
PTO power
About 46 to 50 PTO hp
Estimated from the 55 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 55 hp tractor can run
Maximum size is about a 6.5 ft rotary cutter or a 5.5 ft tiller. The calculator also sizes discs, plows and balers.
Units
55 hp is 41.0 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Category medians
5055E (2008-2012) vs. Utility median
John Deere 5055E (2008-2012) compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 55 hp | 55 hp | at median | 50th |
| Engine Displacement | 179 ci | 183 ci | -2% | 48th |
| Cylinders | 3 | 4 | -25% | 23rd |
| Forward Gears | 9 | 12 | -25% | 35th |
| Length | 138 in | 137 in | +1% | 52nd |
| Width | 57.1 in | 66 in | -13% | 31st |
| Height | 94.5 in | 94.1 in | 0% | 51st |
| 3-Point Hitch Capacity | 3,190 lb | 3,197 lb | 0% | 50th |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 1,083–5,720 models).
Same manufacturer
Other John Deere models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
When was the John Deere 5055E (2008-2012) in production?
John Deere 5055E (2008-2012) production started in 2008 and ended in 2012.
What transmission is in the John Deere 5055E (2008-2012)?
Transmission on the John Deere 5055E (2008-2012) is Partially synchronized, with 9 forward speeds.
What type of hydraulic system does the John Deere 5055E (2008-2012) use?
Hydraulics on the John Deere 5055E (2008-2012) are Open center.
What hitch category is the John Deere 5055E (2008-2012)?
The John Deere 5055E (2008-2012) uses a Category II hitch with a lift capacity of 3,190 lb.
How much horsepower does the John Deere 5055E (2008-2012) have?
The John Deere 5055E (2008-2012) produces 55 hp from its 3-cylinder engine. Engine displacement is 179 ci.
What maintenance does the John Deere 5055E (2008-2012) require?
The John Deere 5055E (2008-2012) needs periodic engine oil and filter changes, hydraulic fluid checks, and regular greasing and inspection. The owner's manual lists the manufacturer's recommended service intervals.