Mitsubishi GSK190
The Mitsubishi GSK190 is a compact crawler tractor designed for tough jobs in tight spaces. This half-track machine uses tracks instead of wheels, making it great for working on rough or muddy ground. It has a powerful steering system and a manual transmission with 12 forward and 12 reverse gears, giving the driver lots of control. Under the hood, the GSK190 has a small but mighty Iseki E3112 engine. This diesel engine has three cylinders and is cooled by liquid. It runs at a very high 2500 RPM and puts out 18.8 horsepower. The tractor is quite small, measuring 106.5 inches long, 48.8 inches wide, and 78.4 inches tall. It's also pretty light, weighing just 2282 pounds. The GSK190 starts up easily with an electric starter and has good ground clearance at 15.4 inches.
Key specifications
- Category
- Crawler
- Engine power
- 19hp
- Operating weight
- 2,282 lb
- Transmission
- Manual
Category comparison
GSK190 compared with its category
vs. Crawler medianDistribution
Engine Power (hp)
All recorded Crawler tractors
This model
The GSK190 ranks at the 1st percentile for engine power among recorded crawler tractors.
Overview
About the Mitsubishi GSK190
The Mitsubishi GSK190 is a compact crawler tractor designed for tough jobs in tight spaces. This half-track machine uses tracks instead of wheels, making it great for working on rough or muddy ground. It has a powerful steering system and a manual transmission with 12 forward and 12 reverse gears, giving the driver lots of control. Under the hood, the GSK190 has a small but mighty Iseki E3112 engine. This diesel engine has three cylinders and is cooled by liquid. It runs at a very high 2500 RPM and puts out 18.8 horsepower. The tractor is quite small, measuring 106.5 inches long, 48.8 inches wide, and 78.4 inches tall. It's also pretty light, weighing just 2282 pounds. The GSK190 starts up easily with an electric starter and has good ground clearance at 15.4 inches.
Full specifications
Recorded specifications
General
| Manufacturer | Mitsubishi |
|---|---|
| Model | GSK190 |
| Category | Crawler tractor |
| Type | Half-track |
| Operating weight | 2,282lb(1,035 kg) |
Engine
| Make | Iseki |
|---|---|
| Model | E3112 |
| Power | 18.8hp(14.02 kW) |
| Cylinders | 3 |
| Displacement | 68.5ci(1.12 L) |
| Bore | 3.08in(78.23 mm) |
| Stroke | 3.07in(77.98 mm) |
Transmission
| Type | Manual |
|---|---|
| Forward gears | 12 |
| Reverse gears | 12 |
Chassis & drive
| Chassis | Half-track |
|---|---|
| Drive | Track |
| Steering | Power |
Dimensions
| Length | 106.5in(2,705 mm) |
|---|---|
| Width | 48.8in(1,240 mm) |
| Height | 78.4in(1,991 mm) |
| Operating weight | 2,282lb(1,035 kg) |
Closest alternatives
GSK190 compared with the nearest models by horsepower
Among crawler tractors, the Mitsubishi GSK20 and the Mitsubishi GSK205 are closest to the Mitsubishi GSK190 in rated horsepower. The Mitsubishi GSK20 makes 0.9 hp more and weighs 600 lb more, so it carries more weight per horsepower, which helps traction in draft work. The Mitsubishi GSK205 is rated 0.9 hp higher at almost the same operating weight.
| Spec | Mitsubishi GSK190 | Mitsubishi GSK20 | Mitsubishi GSK205 |
|---|---|---|---|
| Engine power | 18.8 hp14 kW | 19.7 hp14.7 kW | 19.7 hp14.7 kW |
| Operating weight | 2,282 lb1,035 kg | 2,877 lb1,305 kg | 2,304 lb1,045 kg |
| Weight per hp | 121 lb/hp74 kg/kW | 146 lb/hp89 kg/kW | 117 lb/hp71 kg/kW |
| Displacement | 68.5 ci1.12 L | 83.2 ci1.36 L | 68.5 ci1.12 L |
| Cylinders | 3 | 3 | 3 |
| Drive | Track | Track | Track |
Calculators
Calculators for the GSK190
PTO power
About 16 to 17 PTO hp
Estimated from the 18.8 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 18.8 hp tractor can run
The calculator sizes mowers, tillers, discs, plows and balers for this tractor.
Ballast
141 lb per PTO hp as listed
The calculator gives the target weight and front/rear split for each job.
Units
18.8 hp is 14.0 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Category medians
GSK190 vs. Crawler median
Mitsubishi GSK190 compared with other Crawler tractors
| Spec | This model | Crawler median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 18.8 hp | 200 hp | -91% | 1st |
| Engine Displacement | 68.5 ci | 468 ci | -85% | 2nd |
| Cylinders | 3 | 6 | -50% | 10th |
| Forward Gears | 12 | 10 | +20% | 54th |
| Operating Weight | 2,282 lb | 23,320 lb | -90% | 2nd |
| Length | 107 in | 146 in | -27% | 12th |
| Width | 48.8 in | 79.5 in | -39% | 9th |
| Height | 78.4 in | 90.6 in | -13% | 34th |
Medians and percentiles are calculated from the crawler tractors in the database that have a recorded value for each specification (sample size 134–192 models).
Same manufacturer
Other Mitsubishi models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What is the engine power output of the Mitsubishi GSK190?
Rated engine output for the Mitsubishi GSK190 is 18.8 hp, delivered by a 3-cylinder engine. The engine displaces 68.5 ci.
Which transmission does the Mitsubishi GSK190 use?
The Mitsubishi GSK190 is equipped with a Manual transmission with 12 forward gears.
What is the operating weight of the Mitsubishi GSK190?
The Mitsubishi GSK190 has an operating weight of about 2,282 lb.
How do I maintain a Mitsubishi GSK190?
Routine service for the Mitsubishi GSK190 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.




