The Elmer Co. 20-40
The Elmer Co. 20-40 is a utility tractor with a standard tread design. It's a 2-wheel drive machine with manual steering and a gear transmission. This tractor has 2 forward gears and 1 reverse gear, making it simple to operate. The 20-40 is powered by a Huber engine that runs on kerosene. It has 2 cylinders and a very large engine displacement of 905 ci. The engine is liquid-cooled and has a low rated speed of 1100 rpm. This tractor is quite heavy, weighing 9360 lb, which is above average for its class. It's a big machine, measuring 179 inches long, 87 inches wide, and 94 inches tall. The rear tires are made of steel, which was common for tractors of its time.
Key specifications
- Category
- Utility
- Operating weight
- 9,360 lb
- Transmission
- Gear
Overview
About the The Elmer Co. 20-40
The Elmer Co. 20-40 is a utility tractor with a standard tread design. It's a 2-wheel drive machine with manual steering and a gear transmission. This tractor has 2 forward gears and 1 reverse gear, making it simple to operate. The 20-40 is powered by a Huber engine that runs on kerosene. It has 2 cylinders and a very large engine displacement of 905 ci. The engine is liquid-cooled and has a low rated speed of 1100 rpm. This tractor is quite heavy, weighing 9360 lb, which is above average for its class. It's a big machine, measuring 179 inches long, 87 inches wide, and 94 inches tall. The rear tires are made of steel, which was common for tractors of its time.
Full specifications
Recorded specifications
General
| Manufacturer | The Elmer Co. |
|---|---|
| Model | 20-40 |
| Category | Utility tractor |
| Type | 4x2 2WD |
| Operating weight | 9,360lb(4,246 kg) |
Engine
| Make | Huber |
|---|---|
| Cylinders | 2 |
| Displacement | 905ci(14.83 L) |
| Bore | 8in(203.2 mm) |
| Stroke | 9in(228.6 mm) |
Transmission
| Type | Gear |
|---|---|
| Forward gears | 2 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Manual |
Dimensions
| Length | 179in(4,547 mm) |
|---|---|
| Width | 87in(2,210 mm) |
| Height | 94in(2,388 mm) |
| Operating weight | 9,360lb(4,246 kg) |
Capacities
| Cooling system | 48gal(181.7 L) |
|---|
Parts and manuals
Parts and manuals for the The Elmer Co. 20-40
Each link opens a retailer search keyed to the fields recorded for this model. Confirm fitment against the serial plate before ordering.
Filters
- Oil filter for the HuberAmazon
Fits the Huber 2-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Air filter for the HuberAmazon
Fits the Huber 2-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Fuel filter for the HuberAmazon
Fits the Huber 2-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
- Hydraulic filter for the HuberAmazon
Fits the Huber 2-cylinder kerosene engine listed for this model. Confirm the part number against the engine serial plate.
Manuals
- The Elmer Co. 20-40 service and repair manualseManualOnline
Digital manuals. Check the serial number range on the listing.
- The Elmer Co. 20-40 operator's manualAmazon
Printed and reprint manuals. Check the serial number range on the listing.
- The Elmer Co. 20-40 service manualAmazon
Shop and repair manuals for this model.
Links in this section go to retailers. A purchase through them earns this site a commission at no extra cost to the buyer. As an Amazon Associate, Heavy Equipment Specs earns from qualifying purchases. Affiliate disclosure
Category medians
20-40 vs. Utility median
The Elmer Co. 20-40 compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 905 ci | 183 ci | +394% | 98th |
| Cylinders | 2 | 4 | -50% | 3rd |
| Forward Gears | 2 | 12 | -83% | 1st |
| Operating Weight | 9,360 lb | 5,303 lb | +77% | 83rd |
| Length | 179 in | 137 in | +31% | 90th |
| Width | 87 in | 66 in | +32% | 90th |
| Height | 94 in | 94.1 in | 0% | 50th |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 3,933–5,720 models).
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What engine configuration does the The Elmer Co. 20-40 use?
The The Elmer Co. 20-40 is equipped with a 2-cylinder engine displacing 905 ci.
What is the operating weight of the The Elmer Co. 20-40?
The The Elmer Co. 20-40 has an operating weight of about 9,360 lb.
Which transmission does the The Elmer Co. 20-40 use?
The The Elmer Co. 20-40 is equipped with a Gear transmission with 2 forward gears.
How do I maintain a The Elmer Co. 20-40?
Routine service for the The Elmer Co. 20-40 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.
