Row CropPerformance profile

AGCO DT250B

The AGCO DT250B is a powerful row crop tractor built from 2009 to 2010. It has a strong 6-cylinder diesel engine made by AGCO SISU POWER. This engine is very big for its class and can produce 290 horsepower, which is a lot of power for a tractor. The DT250B has four-wheel drive and uses a special transmission that gives it infinite forward and reverse speeds. This tractor is big and heavy, weighing 25,960 pounds. It has a three-point hitch at the back that can lift very heavy loads, up to 26,460 pounds. The DT250B has a closed center hydraulic system, but its pump flow is lower than average for tractors like this. It comes with a comfortable cab that has both heating and air conditioning. The tractor is 215.7 inches long and 141 inches tall, making it a large machine for serious farming work. It can use both front and rear power take-off (PTO) systems, which run at 1000 rpm.

ManufacturerAGCOPower290 hpEngine6-cylTransContinuously variable transmission
Image not recorded

Quick specs

Category
Row Crop
Engine Power Output
290hp
Operating Weight
25,960 lb
Transmission
Continuously variable transmission
Compare this model

At a glance

How the DT250B compares

vs. Row Crop median

Distribution

Engine Power (hp)

Across all Row Crop tractors

290 hp · 92nd

This model

12
Median 138 hp
283
This modelRow Crop tractorsMediann = 1,206

The DT250B ranks at the 92nd percentile for engine power among recorded row crop tractors.

Overview

About the AGCO DT250B

The AGCO DT250B is a powerful row crop tractor built from 2009 to 2010. It has a strong 6-cylinder diesel engine made by AGCO SISU POWER. This engine is very big for its class and can produce 290 horsepower, which is a lot of power for a tractor. The DT250B has four-wheel drive and uses a special transmission that gives it infinite forward and reverse speeds. This tractor is big and heavy, weighing 25,960 pounds. It has a three-point hitch at the back that can lift very heavy loads, up to 26,460 pounds. The DT250B has a closed center hydraulic system, but its pump flow is lower than average for tractors like this. It comes with a comfortable cab that has both heating and air conditioning. The tractor is 215.7 inches long and 141 inches tall, making it a large machine for serious farming work. It can use both front and rear power take-off (PTO) systems, which run at 1000 rpm.

Full specifications

Every recorded spec

General

ManufacturerAGCO
ModelDT250B
CategoryRow Crop tractor
TypeType front wheel assist with duals
Years built2009–2010
Operating weight25,960lb

Engine

MakeAGCO SISU POWER
Model84CTA
Power290hp
Cylinders6
Displacement513ci
Bore4.37in
Stroke5.71in

Transmission

TypeContinuously variable transmission

Chassis & drive

ChassisType front wheel assist with duals
Drive4WD
SteeringPower
BrakesHydraulic wet disc
CabCab with heat and air-conditioning

Hydraulics

TypeClosed center pressure flow compensated (PFC)
Pump flow51gpm

Power take-off

Rear PTOOptional Front and Independent Rear with electro-hydraulic clutch
PTO speed1,000rpm

Dimensions

Length215.7in
Height141in
Operating weight25,960lb

Head to head

DT250B vs. Row Crop median

How the AGCO DT250B compares to other Row Crop tractors

SpecThis modelRow Crop medianDifferencePercentile
Engine Power290 hp138 hp+110%92nd
Engine Displacement513 ci391 ci+31%92nd
Cylinders66at median50th
Operating Weight25,960 lb12,307 lb+111%95th
Length216 in180 in+20%88th
Height141 in114 in+24%98th
3-Point Hitch Capacity26,460 lb11,023 lb+140%91st

Medians and percentiles are computed from the row crop tractors in our database with a recorded value for each spec (sample sizes 2791,417 models).

Explore

AGCO siblings

All AGCO models →

Explore

Similar-spec models

FAQ

Common questions

What years was the AGCO DT250B manufactured?

Production of the AGCO DT250B ran from 2009 through 2010.

What type of transmission does the AGCO DT250B have?

The AGCO DT250B uses a Continuously variable transmission transmission.

What hydraulics does the AGCO DT250B have?

The AGCO DT250B uses a Closed center pressure flow compensated (PFC) hydraulic system with a pump flow of 51 gpm.

What three-point hitch category does the AGCO DT250B use?

The AGCO DT250B has a Category III three-point hitch rated to lift 26,460 lb.

How powerful is the AGCO DT250B?

The AGCO DT250B has an engine power output of 290 hp. It is powered by a 6-cylinder engine displacing 513 ci.

What is the working weight of the AGCO DT250B?

The operating weight of the AGCO DT250B is approximately 25,960 lb.

What routine service does the AGCO DT250B need?

Regular maintenance for the AGCO DT250B includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.