Farmall 856
The Farmall 856 is a row crop tractor made from 1967 to 1971. It has a 2WD drive system and hydrostatic power steering, making it easy to control in the fields. The tractor uses a sliding gear transmission with 8 forward gears and 4 reverse gears, giving farmers plenty of options for different tasks. Under the hood, the Farmall 856 has a 6-cylinder diesel engine made by International Harvester. The engine is liquid-cooled and naturally aspirated, with an above-average displacement of 406.9 ci. It can produce 95 hp at 2400 rpm, which is enough power for many farm jobs. The tractor weighs 10,290 lb and has ag tires on both front and back. It comes with an IH Fast Hitch system at the rear, rated as category II, and has an independent PTO that can run at 1000 rpm. This tractor has an open operator station, which means no cab. It uses an electric starter and has independent hydraulic disc brakes for safe stopping. The Farmall 856 is 163.8 inches long and 91.7 inches wide, making it a good size for row crop work. Overall, it's a solid, mid-range tractor that was popular with farmers in the late 1960s and early 1970s.
Key specifications
- Category
- Row Crop
- Engine power
- 95hp
- Operating weight
- 10,290 lb
- Transmission
- Sliding gear with dry disc clutch
Category comparison
856 compared with its category
vs. Row Crop medianDistribution
Engine Power (hp)
All recorded Row Crop tractors
This model
The 856 ranks at the 21st percentile for engine power among recorded row crop tractors.
Overview
About the Farmall 856
The Farmall 856 is a row crop tractor made from 1967 to 1971. It has a 2WD drive system and hydrostatic power steering, making it easy to control in the fields. The tractor uses a sliding gear transmission with 8 forward gears and 4 reverse gears, giving farmers plenty of options for different tasks. Under the hood, the Farmall 856 has a 6-cylinder diesel engine made by International Harvester. The engine is liquid-cooled and naturally aspirated, with an above-average displacement of 406.9 ci. It can produce 95 hp at 2400 rpm, which is enough power for many farm jobs. The tractor weighs 10,290 lb and has ag tires on both front and back. It comes with an IH Fast Hitch system at the rear, rated as category II, and has an independent PTO that can run at 1000 rpm. This tractor has an open operator station, which means no cab. It uses an electric starter and has independent hydraulic disc brakes for safe stopping. The Farmall 856 is 163.8 inches long and 91.7 inches wide, making it a good size for row crop work. Overall, it's a solid, mid-range tractor that was popular with farmers in the late 1960s and early 1970s.
Full specifications
Recorded specifications
General
| Manufacturer | Farmall |
|---|---|
| Model | 856 |
| Category | Row Crop tractor |
| Type | 2WD |
| Years built | 1967–1971 |
| Operating weight | 10,290lb(4,667 kg) |
Engine
| Make | International Harvester |
|---|---|
| Model | D-407 |
| Power | 95hp(70.84 kW) |
| Cylinders | 6 |
| Displacement | 406.9ci(6.67 L) |
| Bore | 4.33in(110 mm) |
| Stroke | 4.61in(117.1 mm) |
Transmission
| Type | Sliding gear with dry disc clutch |
|---|---|
| Forward gears | 8 |
| Reverse gears | 4 |
Chassis & drive
| Drive | 2WD |
|---|---|
| Steering | Hydrostatic power |
| Brakes | Independent hydraulic disc |
| Cab | Open |
Power take-off
| Rear PTO | Independent |
|---|---|
| PTO speed | 1,000rpm |
Dimensions
| Length | 163.8in(4,161 mm) |
|---|---|
| Width | 91.7in(2,329 mm) |
| Operating weight | 10,290lb(4,667 kg) |
Capacities
| Cooling system | 6gal(22.71 L) |
|---|
Closest alternatives
856 compared with the nearest models by horsepower
The closest row crop models to the Farmall 856 by rated horsepower are the Massey Ferguson 6150 and the Claas Arion 410. The Massey Ferguson 6150 matches it on rated power and weighs 680 lb less. It entered production in 1995, 28 years after the 856. The Claas Arion 410 matches it on rated power and weighs 290 lb more.
| Spec | Farmall 856 | Massey Ferguson 6150 | Claas Arion 410 |
|---|---|---|---|
| Engine power | 95 hp70.8 kW | 95 hp70.8 kW | 95 hp70.8 kW |
| Operating weight | 10,290 lb4,667 kg | 9,606 lb4,357 kg | 10,580 lb4,799 kg |
| Weight per hp | 108 lb/hp66 kg/kW | 101 lb/hp62 kg/kW | 111 lb/hp68 kg/kW |
| Displacement | 406.9 ci6.67 L | 244 ci4 L | 276.4 ci4.53 L |
| Cylinders | 6 | 4 | 4 |
| Transmission | Sliding gear with dry disc clutch | Synchronized | Power Shift |
| Drive | 2WD | 2WD | 4WD |
| Years built | 1967-1971 | 1995-1998 | - |
Calculators
Calculators for the 856
PTO power
About 79 to 86 PTO hp
Estimated from the 95 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 95 hp tractor can run
Maximum size is about a 11.5 ft rotary cutter or a 9.5 ft tiller. The calculator also sizes discs, plows and balers.
Ballast
126 lb per PTO hp as listed
Heavy draft work calls for 130 to 150 lb/hp. The calculator gives the ballast to add.
Units
95 hp is 70.8 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Parts and manuals
Parts and manuals for the Farmall 856
Each link opens a retailer search keyed to the fields recorded for this model. Confirm fitment against the serial plate before ordering.
Filters
- Oil filter for the International Harvester D-407Amazon
Fits the International Harvester D-407 6-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Air filter for the International Harvester D-407Amazon
Fits the International Harvester D-407 6-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Fuel filter for the International Harvester D-407Amazon
Fits the International Harvester D-407 6-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Hydraulic filter for the International Harvester D-407Amazon
Fits the International Harvester D-407 6-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
Manuals
- Farmall 856 service and repair manualseManualOnline
Digital manuals. Built 1967 to 1971. Check the serial number range on the listing.
- Farmall 856 operator's manualAmazon
Printed and reprint manuals. Built 1967 to 1971. Check the serial number range on the listing.
- Farmall 856 service manualAmazon
Shop and repair manuals for this model.
Links in this section go to retailers. A purchase through them earns this site a commission at no extra cost to the buyer. As an Amazon Associate, Heavy Equipment Specs earns from qualifying purchases. Affiliate disclosure
Category medians
856 vs. Row Crop median
Farmall 856 compared with other Row Crop tractors
| Spec | This model | Row Crop median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 95 hp | 138 hp | -31% | 21st |
| Engine Displacement | 407 ci | 391 ci | +4% | 57th |
| Cylinders | 6 | 6 | at median | 50th |
| Forward Gears | 8 | 16 | -50% | 16th |
| Operating Weight | 10,290 lb | 12,307 lb | -16% | 34th |
| Length | 164 in | 180 in | -9% | 28th |
| Width | 91.7 in | 91.2 in | +1% | 51st |
Medians and percentiles are calculated from the row crop tractors in the database that have a recorded value for each specification (sample size 806–1,417 models).
Same manufacturer
Other Farmall models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What years was the Farmall 856 manufactured?
Production of the Farmall 856 ran from 1967 through 1971.
What is the working weight of the Farmall 856?
The operating weight of the Farmall 856 is approximately 10,290 lb.
What type of transmission does the Farmall 856 have?
The Farmall 856 uses a Sliding gear with dry disc clutch transmission offering 8 forward gears.
What hitch category is the Farmall 856?
The Farmall 856 uses a Category II hitch.
How powerful is the Farmall 856?
The Farmall 856 has an engine power output of 95 hp. It is powered by a 6-cylinder engine displacing 406.9 ci.
What routine service does the Farmall 856 need?
Regular maintenance for the Farmall 856 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.


