Row Crop

Farmall AM-7

The Farmall AM-7 is a row crop tractor built for farm work. It has a 2-wheel drive system and a gear transmission with 5 forward gears and 1 reverse gear. The tractor runs on a 4-cylinder kerosene engine made by International Harvester. This engine is naturally aspirated and has a displacement of 264 cubic inches, which is below average for tractors of its kind. The AM-7 weighs 6,801 pounds and measures 133 inches long and 101 inches wide. It has a Category II hitch, which is good for attaching various farm tools. The tractor has agricultural tires, with 6.00x16 tires in front and larger 12x38 tires in the back. It also has a good ground clearance of 26.5 inches, helping it move easily over rough farm terrain. The AM-7 uses a 6-volt starter system and has an engine that runs at 1,450 RPM, which is lower than most other tractors.

ManufacturerFarmallEngine4-cylTransGear
Image not recorded

Quick specs

Category
Row Crop
Operating Weight
6,801 lb
Transmission
Gear
Compare this model

Overview

About the Farmall AM-7

The Farmall AM-7 is a row crop tractor built for farm work. It has a 2-wheel drive system and a gear transmission with 5 forward gears and 1 reverse gear. The tractor runs on a 4-cylinder kerosene engine made by International Harvester. This engine is naturally aspirated and has a displacement of 264 cubic inches, which is below average for tractors of its kind. The AM-7 weighs 6,801 pounds and measures 133 inches long and 101 inches wide. It has a Category II hitch, which is good for attaching various farm tools. The tractor has agricultural tires, with 6.00x16 tires in front and larger 12x38 tires in the back. It also has a good ground clearance of 26.5 inches, helping it move easily over rough farm terrain. The AM-7 uses a 6-volt starter system and has an engine that runs at 1,450 RPM, which is lower than most other tractors.

Full specifications

Every recorded spec

General

ManufacturerFarmall
ModelAM-7
CategoryRow Crop tractor
Type4x2 2WD
Operating weight6,801lb

Engine

MakeInternational Harvester
Model4.3L 4-cyl kerosene
Cylinders4
Displacement264ci
Bore4in
Stroke5.25in

Transmission

TypeGear
Forward gears5
Reverse gears1

Chassis & drive

Chassis4x2 2WD
Drive2WD

Dimensions

Length133in
Width101in
Operating weight6,801lb

Tires

Front6.00x16
Rear12x38

Head to head

AM-7 vs. Row Crop median

How the Farmall AM-7 compares to other Row Crop tractors

SpecThis modelRow Crop medianDifferencePercentile
Engine Displacement264 ci391 ci-32%19th
Cylinders46-33%17th
Forward Gears516-69%7th
Operating Weight6,801 lb12,307 lb-45%15th
Length133 in180 in-26%8th
Width101 in91.2 in+11%90th

Medians and percentiles are computed from the row crop tractors in our database with a recorded value for each spec (sample sizes 8061,417 models).

Explore

Farmall siblings

All Farmall models →

Explore

Similar-spec models

FAQ

Common questions

What engine configuration does the Farmall AM-7 use?

The Farmall AM-7 is equipped with a 4-cylinder engine displacing 264 ci.

What is the operating weight of the Farmall AM-7?

In working trim, the Farmall AM-7 comes in at roughly 6,801 lb.

Which transmission does the Farmall AM-7 use?

The Farmall AM-7 is equipped with a Gear transmission with 5 forward gears.

What are the factory tire sizes for the Farmall AM-7?

The Farmall AM-7 comes with 6.00x16 front tires and 12x38 rear tires.

What three-point hitch category does the Farmall AM-7 use?

The Farmall AM-7 has a Category Category 3 three-point hitch.

How do I maintain a Farmall AM-7?

Routine service for the Farmall AM-7 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.