UtilityPerformance profile
John Deere 4300
The John Deere 4300 is a utility tractor that was made from 1998 to 2003. It's a compact machine, measuring 116.9 inches long, 50 inches wide, and 83.9 inches tall. This tractor is great for small farms and big yards, weighing 3000 pounds. Under the hood, the 4300 has a Yanmar 3TNE84 engine. It's a diesel engine with three cylinders and runs at a very high 2700 rpm. The engine puts out 32.2 horsepower, which is below average for tractors. It has power steering and a three-point hitch at the back that can lift up to 2198 pounds, which is above average. The tractor also has a PTO (power take-off) that spins at 540 rpm, letting you use different tools. For safety, it has a two-post roll-over protection system (ROPS) to keep the driver safe.
ManufacturerJohn DeerePower32.2 hpEngine3-cyl
Image not recorded
Quick specs
- Category
- Utility
- Engine Power Output
- 32hp
- Operating Weight
- 3,000 lb
At a glance
How the 4300 compares
vs. Utility medianDistribution
Engine Power (hp)
Across all Utility tractors
32.2 hp · 25th
This model
9
Median 55 hp
177
This modelUtility tractorsMediann = 5,383
The 4300 ranks at the 25th percentile for engine power among recorded utility tractors.
Overview
About the John Deere 4300
The John Deere 4300 is a utility tractor that was made from 1998 to 2003. It's a compact machine, measuring 116.9 inches long, 50 inches wide, and 83.9 inches tall. This tractor is great for small farms and big yards, weighing 3000 pounds. Under the hood, the 4300 has a Yanmar 3TNE84 engine. It's a diesel engine with three cylinders and runs at a very high 2700 rpm. The engine puts out 32.2 horsepower, which is below average for tractors. It has power steering and a three-point hitch at the back that can lift up to 2198 pounds, which is above average. The tractor also has a PTO (power take-off) that spins at 540 rpm, letting you use different tools. For safety, it has a two-post roll-over protection system (ROPS) to keep the driver safe.
Full specifications
Every recorded spec
General
| Manufacturer | John Deere |
|---|---|
| Model | 4300 |
| Category | Utility tractor |
| Years built | 1998–2003 |
| Operating weight | 3,000lb |
Engine
| Make | Yanmar |
|---|---|
| Model | 3TNE84 |
| Power | 32.2hp |
| Cylinders | 3 |
| Displacement | 91.3ci |
| Bore | 3.31in |
| Stroke | 3.54in |
Chassis & drive
| Steering | Power |
|---|---|
| Brakes | Differential wet disc |
| Cab | Two-post ROPS |
Hydraulics
| Type | Open center |
|---|
Power take-off
| Rear PTO | Independent with wet disc clutch |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Length | 116.9in |
|---|---|
| Width | 50in |
| Height | 83.9in |
| Operating weight | 3,000lb |
Capacities
| Cooling system | 1.53gal |
|---|
Head to head
4300 vs. Utility median
How the John Deere 4300 compares to other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 32.2 hp | 55 hp | -41% | 25th |
| Engine Displacement | 91.3 ci | 183 ci | -50% | 17th |
| Cylinders | 3 | 4 | -25% | 23rd |
| Operating Weight | 3,000 lb | 5,303 lb | -43% | 23rd |
| Length | 117 in | 137 in | -14% | 23rd |
| Width | 50 in | 66 in | -24% | 17th |
| Height | 83.9 in | 94.1 in | -11% | 31st |
| 3-Point Hitch Capacity | 2,198 lb | 3,197 lb | -31% | 26th |
Medians and percentiles are computed from the utility tractors in our database with a recorded value for each spec (sample sizes 1,083–5,720 models).
Compare to tractors with similar specs
Commonly compared John Deere tractors
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| John Deere 2032R (2013-2016) | 32 hp | 1,971 lb | 2013–2016 | Compare → |
| John Deere 3203 | 32 hp | 2,700 lb | 2006–2008 | Compare → |
| John Deere 820 (1968-1973) | 32 hp | — | 1968–1973 | Compare → |
| John Deere 3320 | 32.5 hp | 2,900 lb | 2005–2013 | Compare → |
| John Deere 310 | 31.6 hp | 4,620 lb | 1966–1967 | Compare → |
Commonly compared tractors with similar horsepower from other brands
| Tractor | Engine Power | Operating Weight | Years | Compare |
|---|---|---|---|---|
| AGCO ST32 | 33 hp | 2,642 lb | — | Compare → |
| AGCO ST33A | 33 hp | 2,400 lb | — | Compare → |
| AGCO ST34A | 33 hp | 3,000 lb | — | Compare → |
| AGCO ST35 | 33 hp | 3,168 lb | — | Compare → |
| Allis Chalmers 5030 | 31 hp | 2,530 lb | 1979–1985 | Compare → |
Explore
John Deere siblings
Explore
Similar-spec models
FAQ
Common questions
What years was the John Deere 4300 manufactured?
Production of the John Deere 4300 ran from 1998 through 2003.
What is the working weight of the John Deere 4300?
The operating weight of the John Deere 4300 is approximately 3,000 lb.
What type of hydraulic system does the John Deere 4300 use?
Hydraulics on the John Deere 4300 are Open center.
What hitch category is the John Deere 4300?
The John Deere 4300 uses a Category I hitch with a lift capacity of 2,198 lb.
How powerful is the John Deere 4300?
The John Deere 4300 has an engine power output of 32.2 hp. It is powered by a 3-cylinder engine displacing 91.3 ci.
What routine service does the John Deere 4300 need?
Regular maintenance for the John Deere 4300 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.