Utility tractorsSpec sheet
New Holland T4.110
The New Holland T4.110 is a powerful utility tractor built from 2015 to 2017. It has a strong FPT F5G engine with 107 hp, which is very high for its class. The engine has 4 cylinders and runs on diesel fuel. It's turbocharged and liquid-cooled, making it perform well in tough conditions. This tractor has a 12-speed transmission with both forward and reverse gears. It uses power steering, making it easy to control. The T4.110 has a VisionView Cab for the operator, providing good visibility and comfort. It has a Category II hitch and three PTO speeds: 540 rpm, 540E rpm, and 1000 rpm. The hydraulic system is open center type, and it can lift up to 7350 lbs at the hitch ends. With ag tires and wet disc brakes, this tractor is ready for farm work. It weighs 6989 lb, which is above average for its size, giving it good stability.
ManufacturerNew HollandPower107 hp(79.8 kW)Class100–150 HP tractors →Engine4-cylinderTransmissionMechanical shuttle
Image not recorded
Key specifications
- Category
- Utility
- Engine power
- 107hp
- Operating weight
- 6,989 lb
- Transmission
- Mechanical shuttle
Category comparison
T4.110 compared with its category
vs. Utility medianDistribution
Engine Power (hp)
All recorded Utility tractors
107 hp · 86th
This model
9
Median 55 hp
177
This modelUtility tractorsMediann = 5,383
The T4.110 ranks at the 86th percentile for engine power among recorded utility tractors.
Overview
About the New Holland T4.110
The New Holland T4.110 is a powerful utility tractor built from 2015 to 2017. It has a strong FPT F5G engine with 107 hp, which is very high for its class. The engine has 4 cylinders and runs on diesel fuel. It's turbocharged and liquid-cooled, making it perform well in tough conditions. This tractor has a 12-speed transmission with both forward and reverse gears. It uses power steering, making it easy to control. The T4.110 has a VisionView Cab for the operator, providing good visibility and comfort. It has a Category II hitch and three PTO speeds: 540 rpm, 540E rpm, and 1000 rpm. The hydraulic system is open center type, and it can lift up to 7350 lbs at the hitch ends. With ag tires and wet disc brakes, this tractor is ready for farm work. It weighs 6989 lb, which is above average for its size, giving it good stability.
Full specifications
Recorded specifications
General
| Manufacturer | New Holland |
|---|---|
| Model | T4.110 |
| Category | Utility tractor |
| Years built | 2015–2017 |
| Operating weight | 6,989lb(3,170 kg) |
Engine
| Make | FPT |
|---|---|
| Model | F5G |
| Power | 107hp(79.79 kW) |
| Cylinders | 4 |
| Displacement | 207ci(3.39 L) |
| Bore | 3.9in(99.01 mm) |
| Stroke | 4.33in(110 mm) |
Transmission
| Type | Mechanical shuttle |
|---|---|
| Forward gears | 12 |
| Reverse gears | 12 |
Chassis & drive
| Steering | Power |
|---|---|
| Brakes | Wet disc |
| Cab | VisionView Cab |
Hydraulics
| Type | Open center |
|---|
Power take-off
| Rear PTO | Independent |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Width | 75.7in(1,923 mm) |
|---|---|
| Operating weight | 6,989lb(3,170 kg) |
Closest alternatives
T4.110 compared with the nearest models by horsepower
By engine horsepower, the nearest utility models to the T4.110 are the New Holland PowerStar 110 and the CaseIH Farmall 110C. The New Holland PowerStar 110 matches it on rated power. The CaseIH Farmall 110C matches it on rated power at almost the same operating weight.
| Spec | New Holland T4.110 | New Holland PowerStar 110 | CaseIH Farmall 110C |
|---|---|---|---|
| Engine power | 107 hp79.8 kW | 107 hp79.8 kW | 107 hp79.8 kW |
| Operating weight | 6,989 lb3,170 kg | - | 6,989 lb3,170 kg |
| Weight per hp | 65 lb/hp40 kg/kW | - | 65 lb/hp40 kg/kW |
| Displacement | 207 ci3.39 L | 206.7 ci3.39 L | 207 ci3.39 L |
| Cylinders | 4 | 4 | 4 |
| Transmission | Mechanical shuttle | Synchronized shuttle / Creeper | Mechanical Shuttle |
| Drive | - | 4WD | 4WD |
Calculators
Calculators for the T4.110
PTO power
About 89 to 96 PTO hp
Estimated from the 107 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 107 hp tractor can run
Maximum size is about a 12.5 ft rotary cutter or a 11 ft tiller. The calculator also sizes discs, plows and balers.
Ballast
76 lb per PTO hp as listed
Heavy draft work calls for 120 to 135 lb/hp. The calculator gives the ballast to add.
Units
107 hp is 79.8 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Category medians
T4.110 vs. Utility median
New Holland T4.110 compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 107 hp | 55 hp | +95% | 86th |
| Engine Displacement | 207 ci | 183 ci | +13% | 57th |
| Cylinders | 4 | 4 | at median | 50th |
| Forward Gears | 12 | 12 | at median | 50th |
| Operating Weight | 6,989 lb | 5,303 lb | +32% | 67th |
| Width | 75.7 in | 66 in | +15% | 72nd |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 3,933–5,720 models).
Same manufacturer
Other New Holland models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What years was the New Holland T4.110 manufactured?
Production of the New Holland T4.110 ran from 2015 through 2017.
How powerful is the New Holland T4.110?
The New Holland T4.110 has an engine power output of 107 hp. It is powered by a 4-cylinder engine displacing 207 ci.
What is the working weight of the New Holland T4.110?
The operating weight of the New Holland T4.110 is approximately 6,989 lb.
What type of transmission does the New Holland T4.110 have?
The New Holland T4.110 uses a Mechanical shuttle transmission offering 12 forward gears.
What type of hydraulic system does the New Holland T4.110 use?
Hydraulics on the New Holland T4.110 are Open center.
What hitch category is the New Holland T4.110?
The New Holland T4.110 uses a Category Category 3 hitch.
What routine service does the New Holland T4.110 need?
Regular maintenance for the New Holland T4.110 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.