Antonio CarraroModel A
Antonio Carraro TRG 10400
Utility
- power
- 95 hp
- displacement
- 181 ci
- Cylinders
- 4
- Forward gears
- 16
Head to head · Utility
Antonio Carraro TRG 10400 vs Deutz-Fahr 4100E
Deutz-FahrModel B
Deutz-Fahr 4100E
Utility
- power
- 95.2 hp
- displacement
- 176 ci
- Cylinders
- 3
- Forward gears
- 15
Antonio CarraroAntonio Carraro TRG 10400
vs
Deutz-FahrDeutz-Fahr 4100E
How they compare
Headline specs vs. the whole Utility
Engine Power
▲ 4100E higher · +0.2 hp (<1%)TRG 1040095 hp
4100E95.2 hp
Median Utility Tractor55 hp
TRG 10400 is in the 81st percentile; 4100E is in the 81st · 5,383 models
Engine Displacement
▲ TRG 10400 higher · +5 ci (+3%)TRG 10400181 ci
4100E176 ci
Median Utility Tractor183 ci
TRG 10400 is in the 49th percentile; 4100E is in the 47th · 5,580 models
Cylinders
▲ TRG 10400 higher · +1 (+33%)TRG 104004
4100E3
Median Utility Tractor4
TRG 10400 is in the 50th percentile; 4100E is in the 23rd · 5,720 models
Forward Gears
▲ TRG 10400 higher · +1 (+7%)TRG 1040016
4100E15
Median Utility Tractor12
TRG 10400 is in the 73rd percentile; 4100E is in the 64th · 4,941 models
TRG 10400 (A)4100E (B)Median Utility Tractor
Full comparison
Every spec, side by side
General Information
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Manufacturer | Antonio Carraro | Deutz-Fahr | — |
| Model | TRG 10400 | 4100E | — |
| Category | Utility | Utility | Same |
Engine
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Manufacturer | VM Motori | SDF FARMotion | — |
| Model | D754 | KD3TA | — |
| Power Output | 95hp | 95.2hp | ▲ 4100E+0.2 hp · <1% |
| Rated RPM | 2,600RPM | 2,200RPM | ▲ TRG 10400+400 RPM · +18% |
| Cylinders | 4 | 3 | ▲ TRG 10400+1 · +33% |
| Displacement | 181ci | 176ci | ▲ TRG 10400+5 ci · +3% |
| Bore | 3.7in | 4.1in | ▲ 4100E+0.4 in · +11% |
| Stroke | 4.2in | 4.5in | ▲ 4100E+0.3 in · +7% |
Transmission
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Type | Not recorded | Partially Synchronized | — |
Dimensions & Weight
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Length | 138in | 152in | ▲ 4100E+14 in · +10% |
| Width | 55.7in | 78.9in | ▲ 4100E+23.2 in · +42% |
| Height | 91.5in | Not recorded | — |
| Operating Weight | 5,247lb | 6,614lb | ▲ 4100E+1,367 lb · +26% |
Hydraulics
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| System Type | Not recorded | Open Center | — |
| Steering Type | Hydraulic Power | Power | — |
Tires
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Front Tire Size | 11.2R20 | Not recorded | — |
| Rear Tire Size | 320/85R24 | Not recorded | — |
Hitch & Towing
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Hitch Category | II/I | Not recorded | — |
Chassis & Drive
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Chassis Type | 4x4 articulated 4WD | 4x4 | — |
| Drive Type | 4WD | MFWD 4WD | — |
| Steering Type | Hydraulic Power | Power | — |
Electrical
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Starter Type | Electric | Electric | Same |
Operator Station
| Spec | Antonio Carraro TRG 10400 | Deutz-Fahr 4100E | Difference |
|---|---|---|---|
| Type | Not recorded | Open | — |
Category context
Both models against the field
Engine Power
median 55 hpA · 81st percentile (95 hp)B · 81st percentile (95.2 hp)
Engine Displacement
median 183 ciA · 49th percentile (181 ci)B · 47th percentile (176 ci)
Cylinders
median 4A · 50th percentile (4)B · 23rd percentile (3)
Forward Gears
median 12A · 73rd percentile (16)B · 64th percentile (15)
Operating Weight
median 5,303 lbA · 50th percentile (5,247 lb)B · 63rd percentile (6,614 lb)
A · TRG 10400B · 4100EMedian Utility Tractor