Same brandIndustrial
John Deere 440
The John Deere 440 is an industrial tractor made from 1958 to 1960 in Dubuque, Iowa. It's a 2WD machine with power steering, making it easy to handle. The tractor has a 5-speed gear transmission with one reverse gear, giving drivers good control over speed. Under the hood, the 440 has a General Motors 2-53 diesel engine. This engine has 2 cylinders and is liquid-cooled to keep it running smoothly. It's smaller than most tractor engines, with 106 cubic inches of displacement. The tractor weighs 4,080 pounds, which is on the lighter side for industrial tractors. It has a rear hitch and a PTO that spins at 540 rpm, useful for running attachments. The 440 can use many different tools for industrial jobs. It has an open operator station and starts with an electric starter. The fuel tank holds 10.5 US gallons, letting you work for a while before refueling.
Image not recorded
Key specifications
- Category
- Industrial
- Operating weight
- 4,080 lb
- Transmission
- Gear type with dry disc clutch
Overview
About the John Deere 440
The John Deere 440 is an industrial tractor made from 1958 to 1960 in Dubuque, Iowa. It's a 2WD machine with power steering, making it easy to handle. The tractor has a 5-speed gear transmission with one reverse gear, giving drivers good control over speed. Under the hood, the 440 has a General Motors 2-53 diesel engine. This engine has 2 cylinders and is liquid-cooled to keep it running smoothly. It's smaller than most tractor engines, with 106 cubic inches of displacement. The tractor weighs 4,080 pounds, which is on the lighter side for industrial tractors. It has a rear hitch and a PTO that spins at 540 rpm, useful for running attachments. The 440 can use many different tools for industrial jobs. It has an open operator station and starts with an electric starter. The fuel tank holds 10.5 US gallons, letting you work for a while before refueling.
Full specifications
Recorded specifications
General
| Manufacturer | John Deere |
|---|---|
| Model | 440 |
| Category | Industrial tractor |
| Type | 4x2 2WD |
| Years built | 1958–1960 |
| Operating weight | 4,080lb(1,851 kg) |
Engine
| Make | General Motors |
|---|---|
| Model | Feb-53 |
| Cylinders | 2 |
| Displacement | 106ci(1.74 L) |
| Bore | 3.86in(98.04 mm) |
| Stroke | 4.49in(114 mm) |
Transmission
| Type | Gear type with dry disc clutch |
|---|---|
| Forward gears | 5 |
| Reverse gears | 1 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Power assist |
| Cab | Open |
Hydraulics
| Type | Open center |
|---|
Power take-off
| PTO speed | 540rpm |
|---|
Dimensions
| Operating weight | 4,080lb(1,851 kg) |
|---|
Capacities
| Cooling system | 2.5gal(9.46 L) |
|---|
Parts and manuals
Parts and manuals for the John Deere 440
Each link opens a retailer search keyed to the fields recorded for this model. Confirm fitment against the serial plate before ordering.
Filters
- Oil filter for the General Motors Feb-53Amazon
Fits the General Motors Feb-53 2-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Air filter for the General Motors Feb-53Amazon
Fits the General Motors Feb-53 2-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Fuel filter for the General Motors Feb-53Amazon
Fits the General Motors Feb-53 2-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
- Hydraulic filter for the General Motors Feb-53Amazon
Fits the General Motors Feb-53 2-cylinder diesel engine listed for this model. Confirm the part number against the engine serial plate.
Manuals
- John Deere 440 service and repair manualseManualOnline
Digital manuals. Built 1958 to 1960. Check the serial number range on the listing.
- John Deere 440 operator's manualAmazon
Printed and reprint manuals. Built 1958 to 1960. Check the serial number range on the listing.
- John Deere 440 service manualAmazon
Shop and repair manuals for this model.
Links in this section go to retailers. A purchase through them earns this site a commission at no extra cost to the buyer. As an Amazon Associate, Heavy Equipment Specs earns from qualifying purchases. Affiliate disclosure
Category medians
440 vs. Industrial median
John Deere 440 compared with other Industrial tractors
| Spec | This model | Industrial median | Difference | Percentile |
|---|---|---|---|---|
| Engine Displacement | 106 ci | 284 ci | -63% | 9th |
| Cylinders | 2 | 4 | -50% | 5th |
| Forward Gears | 5 | 5 | at median | 50th |
| Operating Weight | 4,080 lb | 9,127 lb | -55% | 19th |
Medians and percentiles are calculated from the industrial tractors in the database that have a recorded value for each specification (sample size 43–55 models).
Same manufacturer
Other John Deere models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
When was the John Deere 440 in production?
John Deere 440 production started in 1958 and ended in 1960.
What three-point hitch category does the John Deere 440 use?
The John Deere 440 has a Category I three-point hitch.
What engine configuration does the John Deere 440 use?
The John Deere 440 is equipped with a 2-cylinder engine displacing 106 ci.
How much does the John Deere 440 weigh?
The John Deere 440 weighs about 4,080 lb in operating condition.
What transmission is in the John Deere 440?
Transmission on the John Deere 440 is Gear type with dry disc clutch, with 5 forward speeds.
What hydraulics does the John Deere 440 have?
The John Deere 440 uses an Open center hydraulic system.
What maintenance does the John Deere 440 require?
The John Deere 440 needs periodic engine oil and filter changes, hydraulic fluid checks, and regular greasing and inspection. The owner's manual lists the manufacturer's recommended service intervals.