Same brandUtility tractorsSpec sheet
Massey Ferguson 1010
The Massey Ferguson 1010 is a small utility tractor that was made from 1982 to 1994. It has a 2-wheel drive system and a manual steering type. The tractor uses a gear transmission with 6 forward gears and 2 reverse gears, giving farmers good control over their speed. This tractor has a Toyosha diesel engine with 3 cylinders. The engine is liquid-cooled and naturally aspirated, which means it doesn't use a turbocharger. It produces 16 horsepower, which is on the lower end compared to other tractors. The engine size is also quite small, with a displacement of 52.8 cubic inches. The tractor weighs 1420 pounds, making it lightweight and easy to maneuver. It has a rear hitch that can lift up to 1213 pounds, which is about average for its size. The tractor also has a power take-off (PTO) that runs at 540 rpm, useful for powering attachments.
ManufacturerMassey FergusonPower16 hp(11.9 kW)ClassUnder 25 HP tractors →Engine3-cylinderTransmissionGear
Image not recorded
Key specifications
- Category
- Utility
- Engine power
- 16hp
- Operating weight
- 1,420 lb
- Transmission
- Gear
Category comparison
1010 compared with its category
vs. Utility medianDistribution
Engine Power (hp)
All recorded Utility tractors
16 hp · 4th
This model
9
Median 55 hp
177
This modelUtility tractorsMediann = 5,383
The 1010 ranks at the 4th percentile for engine power among recorded utility tractors.
Overview
About the Massey Ferguson 1010
The Massey Ferguson 1010 is a small utility tractor that was made from 1982 to 1994. It has a 2-wheel drive system and a manual steering type. The tractor uses a gear transmission with 6 forward gears and 2 reverse gears, giving farmers good control over their speed. This tractor has a Toyosha diesel engine with 3 cylinders. The engine is liquid-cooled and naturally aspirated, which means it doesn't use a turbocharger. It produces 16 horsepower, which is on the lower end compared to other tractors. The engine size is also quite small, with a displacement of 52.8 cubic inches. The tractor weighs 1420 pounds, making it lightweight and easy to maneuver. It has a rear hitch that can lift up to 1213 pounds, which is about average for its size. The tractor also has a power take-off (PTO) that runs at 540 rpm, useful for powering attachments.
Full specifications
Recorded specifications
General
| Manufacturer | Massey Ferguson |
|---|---|
| Model | 1010 |
| Category | Utility tractor |
| Type | 4x2 2WD |
| Years built | 1982–1994 |
| Operating weight | 1,420lb(644.1 kg) |
Engine
| Make | Toyosha |
|---|---|
| Model | Toyosha |
| Power | 16hp(11.93 kW) |
| Cylinders | 3 |
| Displacement | 52.8ci(0.87 L) |
| Bore | 2.76in(70.1 mm) |
| Stroke | 2.95in(74.93 mm) |
Transmission
| Type | Gear |
|---|---|
| Forward gears | 6 |
| Reverse gears | 2 |
Chassis & drive
| Chassis | 4x2 2WD |
|---|---|
| Drive | 2WD |
| Steering | Manual |
| Brakes | Mechanical drum |
| Cab | Open |
Hydraulics
| Type | Open center |
|---|
Power take-off
| Rear PTO | Transmission |
|---|---|
| PTO speed | 540rpm |
Dimensions
| Width | 41.7in(1,059 mm) |
|---|---|
| Height | 46.1in(1,171 mm) |
| Operating weight | 1,420lb(644.1 kg) |
Capacities
| Cooling system | 0.93gal(3.52 L) |
|---|
Closest alternatives
1010 compared with the nearest models by horsepower
Among utility tractors, the Massey Ferguson 1205 and the Kubota B7400 are closest to the Massey Ferguson 1010 in rated horsepower. The Massey Ferguson 1205 matches it on rated power and weighs 160 lb more, so it carries more weight per horsepower, which helps traction in draft work. It entered production in 1997, 15 years after the 1010. The Kubota B7400 matches it on rated power and weighs 130 lb less, carrying 81 lb per horsepower against 89 lb. It entered production in 2000, 18 years after the 1010.
| Spec | Massey Ferguson 1010 | Massey Ferguson 1205 | Kubota B7400 |
|---|---|---|---|
| Engine power | 16 hp11.9 kW | 16 hp11.9 kW | 16 hp11.9 kW |
| Operating weight | 1,420 lb644 kg | 1,580 lb717 kg | 1,288 lb584 kg |
| Weight per hp | 89 lb/hp54 kg/kW | 99 lb/hp60 kg/kW | 81 lb/hp49 kg/kW |
| Displacement | 52.8 ci0.87 L | 56.6 ci0.93 L | 43.9 ci0.72 L |
| Cylinders | 3 | 3 | 3 |
| Transmission | Gear | gear & hydrostatic | Hydrostatic |
| Drive | 2WD | 4WD | 4WD |
| Years built | 1982-1994 | 1997-2003 | 2000-2003 |
Calculators
Calculators for the 1010
PTO power
About 13 to 14 PTO hp
Estimated from the 16 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 16 hp tractor can run
The calculator sizes mowers, tillers, discs, plows and balers for this tractor.
Ballast
103 lb per PTO hp as listed
Heavy draft work calls for 130 to 150 lb/hp. The calculator gives the ballast to add.
Units
16 hp is 11.9 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Category medians
1010 vs. Utility median
Massey Ferguson 1010 compared with other Utility tractors
| Spec | This model | Utility median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 16 hp | 55 hp | -71% | 4th |
| Engine Displacement | 52.8 ci | 183 ci | -71% | 3rd |
| Cylinders | 3 | 4 | -25% | 23rd |
| Forward Gears | 6 | 12 | -50% | 11th |
| Operating Weight | 1,420 lb | 5,303 lb | -73% | 4th |
| Width | 41.7 in | 66 in | -37% | 5th |
| Height | 46.1 in | 94.1 in | -51% | 1st |
| 3-Point Hitch Capacity | 1,213 lb | 3,197 lb | -62% | 9th |
Medians and percentiles are calculated from the utility tractors in the database that have a recorded value for each specification (sample size 1,083–5,720 models).
Same manufacturer
Other Massey Ferguson models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What years was the Massey Ferguson 1010 manufactured?
Production of the Massey Ferguson 1010 ran from 1982 through 1994.
What type of hydraulic system does the Massey Ferguson 1010 use?
Hydraulics on the Massey Ferguson 1010 are Open center.
What hitch category is the Massey Ferguson 1010?
The Massey Ferguson 1010 uses a Category I hitch with a lift capacity of 1,213 lb.
How powerful is the Massey Ferguson 1010?
The Massey Ferguson 1010 has an engine power output of 16 hp. It is powered by a 3-cylinder engine displacing 52.8 ci.
What is the working weight of the Massey Ferguson 1010?
The operating weight of the Massey Ferguson 1010 is approximately 1,420 lb.
What type of transmission does the Massey Ferguson 1010 have?
The Massey Ferguson 1010 uses a Gear transmission offering 6 forward gears.
What routine service does the Massey Ferguson 1010 need?
Regular maintenance for the Massey Ferguson 1010 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.