Allis Chalmers 6060

Complete specifications and technical data for the Allis Chalmers 6060. Compare with similar tractors from Allis Chalmers and other manufacturers.

Jump to Full Specifications List

Quick Specs

Category

Row Crop

Engine Power Output

63hp

Operating Weight

6,465 lb

Transmission

Partially synchronized

The Allis Chalmers 6060 is a row crop tractor built from 1980 to 1984. It's a 2-wheel drive machine with a 4-cylinder diesel engine. This tractor has 63.21 horsepower, which is on the lower end compar...

Specifications

Manufacturer
Allis Chalmers
Model
6060
Category
Row Crop
Manufacturing Years
1980 - 1984
Manufacturer
Allis Chalmers
Model
433T
Power Output
63.21hp
Rated RPM
2,400RPM
Cylinders
4
Displacement
200ci
Bore
3.88in
Stroke
4.25in

Engine Power Output Comparison of Allis Chalmers 6060 vs. Other Row Crop Tractors

Loading Chart...

Type
Partially synchronized
Length
146.5in
Width
68.1in
Height
107.5in
Operating Weight
6,465lb

Operating Weight Comparison of Allis Chalmers 6060 vs. Other Row Crop Tractors

Loading Chart...

System Type
Open center
Steering Type
Hydrostatic power
Type
Independent
Speed 1
540rpm
Hitch Type
Three-Point Hitch
Hitch Category
II
Hitch Position
Rear
Hitch Capacity
3,495lb
Chassis Type
4x2 2WD
Steering Type
Hydrostatic power
Brake Type
Differential hydraulic wet disc
Coolant
17qts
Type
Four-post ROPS or Cab (optional)

Compare to Other Tractors

Frequently Asked Questions

What years was the Allis Chalmers 6060 manufactured?

The Allis Chalmers 6060 was manufactured from 1980 - 1984.

What is the engine power output of the Allis Chalmers 6060?

The Allis Chalmers 6060 has an engine power output of 63.21 hp.

How many cylinders does the Allis Chalmers 6060 have?

The Allis Chalmers 6060 is equipped with a 4-cylinder engine.

What is the operating weight of the Allis Chalmers 6060?

The operating weight of the Allis Chalmers 6060 is approximately 6,465 lb.

What type of transmission does the Allis Chalmers 6060 have?

The Allis Chalmers 6060 is equipped with a Partially synchronized transmission.

What type of hydraulic system does the Allis Chalmers 6060 use?

The Allis Chalmers 6060 uses a Open center hydraulic system.

What hitch category is the Allis Chalmers 6060?

The Allis Chalmers 6060 is a Category II hitch.

What maintenance does the Allis Chalmers 6060 require?

Regular maintenance for the Allis Chalmers 6060 includes checking and changing engine oil, hydraulic fluid, filters, and performing routine inspections as recommended in the owner's manual. Always refer to the manufacturer's maintenance schedule for specific intervals and procedures.