Sub-Compact tractorsSpec sheet
Deutz-Fahr DX 3.30
The Deutz-Fahr DX 3.30 is a compact and versatile 2WD tractor. It's powered by a Deutz-Fahr F3L 912 engine, which is an air-cooled diesel with 3 cylinders. This engine puts out 54 hp at 2500 rpm, making it suitable for various farm tasks. The tractor has a partially synchronized transmission with 8 forward and 4 reverse gears, giving operators good control over speed and power. This tractor measures 140.2 inches long, 82.3 inches wide, and 91.3 inches tall. It weighs 6018 lb, which is a good balance of power and maneuverability. The DX 3.30 features a rear Type I hitch and a 540 rpm PTO, making it compatible with many farm implements. It has an open center operator station and comes with additional features like a 1.375-inch PTO shaft diameter. With its mix of power and compact size, the Deutz-Fahr DX 3.30 is well-suited for small to medium-sized farms.
ManufacturerDeutz-FahrPower54 hp(40.3 kW)Class40–60 HP tractors →Engine3-cylinderTransmissionpartially synchronized
Image not recorded
Key specifications
- Category
- Sub-Compact
- Engine power
- 54hp
- Operating weight
- 6,018 lb
- Transmission
- partially synchronized
Category comparison
DX 3.30 compared with its category
vs. Sub-Compact medianDistribution
Engine Power (hp)
All recorded Sub-Compact tractors
54 hp · 92nd
This model
4
Median 26.85 hp
49
This modelSub-Compact tractorsMediann = 816
The DX 3.30 ranks at the 92nd percentile for engine power among recorded sub-compact tractors.
Overview
About the Deutz-Fahr DX 3.30
The Deutz-Fahr DX 3.30 is a compact and versatile 2WD tractor. It's powered by a Deutz-Fahr F3L 912 engine, which is an air-cooled diesel with 3 cylinders. This engine puts out 54 hp at 2500 rpm, making it suitable for various farm tasks. The tractor has a partially synchronized transmission with 8 forward and 4 reverse gears, giving operators good control over speed and power. This tractor measures 140.2 inches long, 82.3 inches wide, and 91.3 inches tall. It weighs 6018 lb, which is a good balance of power and maneuverability. The DX 3.30 features a rear Type I hitch and a 540 rpm PTO, making it compatible with many farm implements. It has an open center operator station and comes with additional features like a 1.375-inch PTO shaft diameter. With its mix of power and compact size, the Deutz-Fahr DX 3.30 is well-suited for small to medium-sized farms.
Full specifications
Recorded specifications
General
| Manufacturer | Deutz-Fahr |
|---|---|
| Model | DX 3.30 |
| Category | Sub-Compact tractor |
| Type | 2WD |
| Operating weight | 6,018lb(2,730 kg) |
Engine
| Make | Deutz-Fahr |
|---|---|
| Model | F3L 912 |
| Power | 54hp(40.27 kW) |
| Cylinders | 3 |
| Displacement | 172.5ci(2.83 L) |
| Bore | 3.94in(100.1 mm) |
| Stroke | 4.72in(119.9 mm) |
Transmission
| Type | partially synchronized |
|---|---|
| Forward gears | 8 |
| Reverse gears | 4 |
Chassis & drive
| Drive | 2WD |
|---|---|
| Cab | open center |
Power take-off
| PTO speed | 540rpm |
|---|
Dimensions
| Length | 140.2in(3,561 mm) |
|---|---|
| Width | 82.3in(2,090 mm) |
| Height | 91.3in(2,319 mm) |
| Operating weight | 6,018lb(2,730 kg) |
Tires
| Front | 7.5 |
|---|---|
| Rear | 16.9 |
Closest alternatives
DX 3.30 compared with the nearest models by horsepower
Among sub-compact tractors, the Valmet 500 and the Valpadana 6560 are closest to the Deutz-Fahr DX 3.30 in rated horsepower. The Valmet 500 matches it on rated power and weighs 1,170 lb less, so it is lighter for its power, which favors PTO and transport work over heavy draft. The Valpadana 6560 matches it on rated power and weighs 2,120 lb less, carrying 72 lb per horsepower against 111 lb. Of the 3 models, the DX 3.30 has the highest weight per horsepower at 111 lb per hp.
| Spec | Deutz-Fahr DX 3.30 | Valmet 500 | Valpadana 6560 |
|---|---|---|---|
| Engine power | 54 hp40.3 kW | 54 hp40.3 kW | 54.2 hp40.4 kW |
| Operating weight | 6,018 lb2,730 kg | 4,850 lb2,200 kg | 3,902 lb1,770 kg |
| Weight per hp | 111 lb/hp68 kg/kW | 90 lb/hp55 kg/kW | 72 lb/hp44 kg/kW |
| Displacement | 172.5 ci2.83 L | 163.8 ci2.68 L | 121.7 ci1.99 L |
| Cylinders | 3 | 3 | 4 |
| Transmission | partially synchronized | Manual | Synchro Shuttle with Creeper |
| Drive | 2WD | - | MFWD 4WD |
Calculators
Calculators for the DX 3.30
PTO power
About 45 to 49 PTO hp
Estimated from the 54 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 54 hp tractor can run
Maximum size is about a 6.5 ft rotary cutter or a 5.5 ft tiller. The calculator also sizes discs, plows and balers.
Ballast
130 lb per PTO hp as listed
Heavy draft work calls for 130 to 150 lb/hp. The calculator gives the ballast to add.
Units
54 hp is 40.3 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Category medians
DX 3.30 vs. Sub-Compact median
Deutz-Fahr DX 3.30 compared with other Sub-Compact tractors
| Spec | This model | Sub-Compact median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 54 hp | 26.9 hp | +101% | 92nd |
| Engine Displacement | 173 ci | 91.4 ci | +89% | 91st |
| Cylinders | 3 | 3 | at median | 50th |
| Forward Gears | 8 | 9 | -11% | 40th |
| Operating Weight | 6,018 lb | 2,700 lb | +123% | 97th |
| Length | 140 in | 113 in | +24% | 93rd |
| Width | 82.3 in | 50.7 in | +62% | 99th |
| Height | 91.3 in | 78.4 in | +16% | 78th |
Medians and percentiles are calculated from the sub-compact tractors in the database that have a recorded value for each specification (sample size 584–816 models).
Same manufacturer
Other Deutz-Fahr models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
What is the engine power output of the Deutz-Fahr DX 3.30?
Rated engine output for the Deutz-Fahr DX 3.30 is 54 hp, delivered by a 3-cylinder engine. The engine displaces 172.5 ci.
Which transmission does the Deutz-Fahr DX 3.30 use?
The Deutz-Fahr DX 3.30 is equipped with a partially synchronized transmission with 8 forward gears.
What size tires does the Deutz-Fahr DX 3.30 use?
The Deutz-Fahr DX 3.30 is fitted with 7.5 front tires and 16.9 rear tires from the factory.
What is the operating weight of the Deutz-Fahr DX 3.30?
The Deutz-Fahr DX 3.30 has an operating weight of about 6,018 lb.
How do I maintain a Deutz-Fahr DX 3.30?
Routine service for the Deutz-Fahr DX 3.30 covers engine oil and filter changes, hydraulic and coolant level checks, air filter cleaning, and scheduled inspections. Refer to the manufacturer's maintenance schedule for exact intervals.