Allis Chalmers 6080

Complete specifications and technical data for the Allis Chalmers 6080. Compare with similar tractors from Allis Chalmers and other manufacturers.

Jump to Full Specifications List

Quick Specs

Category

Row Crop

Engine Power Output

93hp

Operating Weight

6,500 lb

Transmission

Synchronized

The Allis Chalmers 6080 is a row crop tractor made from 1980 to 1985. It has a 2WD drive system and a 4x2 chassis. The tractor is powered by a 4-cylinder, turbocharged and intercooled diesel engine. T...

Specifications

Manufacturer
Allis Chalmers
Model
6080
Category
Row Crop
Manufacturing Years
1980 - 1985
Manufacturer
Allis Chalmers
Model
433TI
Power Output
93hp
Rated RPM
2,300RPM
Cylinders
4
Displacement
200ci
Bore
3.86in
Stroke
4.25in

Engine Power Output Comparison of Allis Chalmers 6080 vs. Other Row Crop Tractors

Loading Chart...

Type
Synchronized
Length
149.2in
Width
72.8in
Height
107.5in
Operating Weight
6,500lb

Operating Weight Comparison of Allis Chalmers 6080 vs. Other Row Crop Tractors

Loading Chart...

System Type
Open center
Steering Type
Hydrostatic power
Type
Independent
Speed 1
540rpm
PTO Speed (2nd)
1,000rpm
Speed 2
1,000rpm
Hitch Type
Three-point
Hitch Category
II
Hitch Position
Rear
Hitch Capacity
4,500lb
Chassis Type
4x2 2WD
Drive Type
2WD
Steering Type
Hydrostatic power
Brake Type
Differential hydraulic wet disk
Coolant
17qts
Type
Four-post ROPS canopy

Compare to Other Tractors

Frequently Asked Questions

What years was the Allis Chalmers 6080 manufactured?

The Allis Chalmers 6080 was manufactured from 1980 - 1985.

What is the engine power output of the Allis Chalmers 6080?

The Allis Chalmers 6080 has an engine power output of 93 hp.

How many cylinders does the Allis Chalmers 6080 have?

The Allis Chalmers 6080 is equipped with a 4-cylinder engine.

What is the operating weight of the Allis Chalmers 6080?

The operating weight of the Allis Chalmers 6080 is approximately 6,500 lb.

What type of transmission does the Allis Chalmers 6080 have?

The Allis Chalmers 6080 is equipped with a Synchronized transmission.

What type of hydraulic system does the Allis Chalmers 6080 use?

The Allis Chalmers 6080 uses a Open center hydraulic system.

What hitch category is the Allis Chalmers 6080?

The Allis Chalmers 6080 is a Category II hitch.

What maintenance does the Allis Chalmers 6080 require?

Regular maintenance for the Allis Chalmers 6080 includes checking and changing engine oil, hydraulic fluid, filters, and performing routine inspections as recommended in the owner's manual. Always refer to the manufacturer's maintenance schedule for specific intervals and procedures.