Same brandFour-Wheel Drive tractorsSpec sheet
New Holland T9.600
The New Holland T9.600 is a powerful four-wheel drive tractor built for big jobs. It has a strong FPT Cursor 13 TST engine with 535 horsepower. This engine has 6 cylinders and uses diesel fuel. It's cooled by liquid and has a two-stage turbocharger to boost power. This tractor is big and heavy, weighing 44,046 pounds. It's 295 inches long, 120 inches wide, and 156 inches tall. The T9.600 has large 710/70 R42 tires on both front and back. It uses a full power shift transmission with 17 forward gears and 2 reverse gears. The steering is hydrostatic power, which makes it easy to control. The tractor has a closed center load sensing hydraulic system and a rear hitch for attaching equipment. It meets Tier IV emissions standards, using special systems to reduce pollution.
ManufacturerNew HollandPower535 hp(398.9 kW)Class300+ HP tractors →Engine6-cylinderTransmissionFull power shift
Image not recorded
Key specifications
- Category
- Four-Wheel Drive
- Engine power
- 535hp
- Operating weight
- 44,046 lb
- Transmission
- Full power shift
Category comparison
T9.600 compared with its category
vs. Four-Wheel Drive medianDistribution
Engine Power (hp)
All recorded Four-Wheel Drive tractors
535 hp · 84th
This model
84
Median 375 hp
549
This modelFour-Wheel Drive tractorsMediann = 162
The T9.600 ranks at the 84th percentile for engine power among recorded four-wheel drive tractors.
Overview
About the New Holland T9.600
The New Holland T9.600 is a powerful four-wheel drive tractor built for big jobs. It has a strong FPT Cursor 13 TST engine with 535 horsepower. This engine has 6 cylinders and uses diesel fuel. It's cooled by liquid and has a two-stage turbocharger to boost power. This tractor is big and heavy, weighing 44,046 pounds. It's 295 inches long, 120 inches wide, and 156 inches tall. The T9.600 has large 710/70 R42 tires on both front and back. It uses a full power shift transmission with 17 forward gears and 2 reverse gears. The steering is hydrostatic power, which makes it easy to control. The tractor has a closed center load sensing hydraulic system and a rear hitch for attaching equipment. It meets Tier IV emissions standards, using special systems to reduce pollution.
Full specifications
Recorded specifications
General
| Manufacturer | New Holland |
|---|---|
| Model | T9.600 |
| Category | Four-Wheel Drive tractor |
| Type | 4x4 articulated 4WD |
| Operating weight | 44,046lb(19,980 kg) |
Engine
| Make | FPT |
|---|---|
| Model | Cursor 13 TST |
| Power | 535hp(398.9 kW) |
| Cylinders | 6 |
| Displacement | 787ci(12.9 L) |
| Bore | 5.31in(134.9 mm) |
| Stroke | 5.91in(150.1 mm) |
Transmission
| Type | Full power shift |
|---|---|
| Forward gears | 17 |
| Reverse gears | 2 |
Chassis & drive
| Chassis | 4x4 articulated 4WD |
|---|---|
| Drive | 4WD |
| Steering | Hydrostatic power |
| Cab | Cab |
Hydraulics
| Type | Closed center load sensing (CCLS) |
|---|
Dimensions
| Length | 295in(7,493 mm) |
|---|---|
| Width | 120in(3,048 mm) |
| Height | 156in(3,962 mm) |
| Operating weight | 44,046lb(19,980 kg) |
Tires
| Front | 710/70 R42Convert |
|---|---|
| Rear | 710/70 R42Convert |
Closest alternatives
T9.600 compared with the nearest models by horsepower
By engine horsepower, the nearest four-wheel drive models to the T9.600 are the CaseIH Steiger 540 and the Challenger MT865C. The CaseIH Steiger 540 matches it on rated power and weighs 190 lb less. The Challenger MT865C makes 1.1 hp less and weighs 920 lb less. Of the 3 models, the T9.600 has the highest weight per horsepower at 82 lb per hp.
| Spec | New Holland T9.600 | CaseIH Steiger 540 | Challenger MT865C |
|---|---|---|---|
| Engine power | 535 hp398.9 kW | 535 hp398.9 kW | 533.9 hp398.1 kW |
| Operating weight | 44,046 lb19,979 kg | 43,855 lb19,892 kg | 43,125 lb19,561 kg |
| Weight per hp | 82 lb/hp50 kg/kW | 82 lb/hp50 kg/kW | 81 lb/hp49 kg/kW |
| Displacement | 787 ci12.9 L | 787 ci12.9 L | 1,105 ci18.11 L |
| Cylinders | 6 | 6 | 6 |
| Transmission | Full power shift | Full power shift | Caterpillar Powershift |
| Drive | 4WD | 4WD | - |
Calculators
Calculators for the T9.600
PTO power
About 444 to 482 PTO hp
Estimated from the 535 hp engine rating. The calculator also estimates drawbar power by surface.
Implement sizing
Implements a 535 hp tractor can run
Maximum size is about a 63.5 ft rotary cutter or a 54.5 ft tiller. The calculator also sizes discs, plows and balers.
Ballast
96 lb per PTO hp as listed
Heavy draft work calls for 110 to 125 lb/hp. The calculator gives the ballast to add.
Units
535 hp is 398.9 kW
The converter gives kW and metric PS values, as used on European spec sheets.
Tires
Convert the 710/70 R42 tire size
The calculator gives diameter, rolling circumference and the metric or inch equivalent.
Category medians
T9.600 vs. Four-Wheel Drive median
New Holland T9.600 compared with other Four-Wheel Drive tractors
| Spec | This model | Four-Wheel Drive median | Difference | Percentile |
|---|---|---|---|---|
| Engine Power | 535 hp | 375 hp | +43% | 84th |
| Engine Displacement | 787 ci | 826 ci | -5% | 39th |
| Cylinders | 6 | 6 | at median | 50th |
| Forward Gears | 17 | 16 | +6% | 78th |
| Operating Weight | 44,046 lb | 37,428 lb | +18% | 74th |
| Length | 295 in | 275 in | +7% | 67th |
| Width | 120 in | 116 in | +4% | 65th |
| Height | 156 in | 143 in | +9% | 95th |
Medians and percentiles are calculated from the four-wheel drive tractors in the database that have a recorded value for each specification (sample size 71–162 models).
Same manufacturer
Other New Holland models
Other manufacturers
Models with similar horsepower
FAQ
Frequently asked questions
How powerful is the New Holland T9.600?
The New Holland T9.600 has an engine power output of 535 hp. It is powered by a 6-cylinder engine displacing 787 ci.
What three-point hitch category does the New Holland T9.600 use?
The New Holland T9.600 has a Category III three-point hitch.
What is the working weight of the New Holland T9.600?
The operating weight of the New Holland T9.600 is approximately 44,046 lb.
What type of transmission does the New Holland T9.600 have?
The New Holland T9.600 uses a Full power shift transmission offering 17 forward gears.
What hydraulics does the New Holland T9.600 have?
The New Holland T9.600 uses a Closed center load sensing (CCLS) hydraulic system.
What are the factory tire sizes for the New Holland T9.600?
The New Holland T9.600 comes with 710/70 R42 front tires and 710/70 R42 rear tires.
What routine service does the New Holland T9.600 need?
Regular maintenance for the New Holland T9.600 includes checking and changing engine oil, hydraulic fluid, and filters, plus routine inspections as recommended in the owner's manual. Always follow the manufacturer's maintenance schedule for specific intervals and procedures.